|
Home Page
Compact Hybrid Furnace (4 x 4 x 4", 1000C), Muffle/Tube 2-In-1 - KSL1100XSH
|
Product Options
Rated Voltage: |
|
Tube O.D & Accessories: |
|
|
KSL-1100X-S-H-LD is a compact hybrid furnace that offers a 4"x4"x4" heating chamber, and 1-2" insertable quartz tube with flange. it is an ideal furnace for preparing small samples up to 1000oC either under vacuum or a controlled atmosphere with maximum energy saving (500 - 700W only). In addition, the compact furnace can be placed into a glove box to sinter samples.
SPECIFICATIONS:
Model
|
2" O.D. tube with a mechanical pressure gauge |
(Optional) 1" O.D. tube with a mechanical pressure gauge |
Furnace Construction
|
- High-purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
- Drop-down door for easy sample loading
- Hybrid Furnace:
- One-end closed 2" quartz tube, a tube block, and a corresponding flange are included for tube furnace application.
- A thermal block is included to work as a muffle furnace.
- Mechanical Pressure gauge EQ-CM-GV is included for the pressure measurement
-
|
- High-purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
- Drop-down door for easy and safe sample loading
- Hybrid Furnace:
- A two-end open 1" quartz tube, a tube block, and corresponding flanges are included for the tube furnace application.
- The 1" quartz tube penetrates through both ends of the furnace
- Two thermal blocks are included to work as a standard muffle furnace.
- Mechanical Pressure gauge EQ-CM-GV is included
-
|
Quartz Tube
|
|
|
Flange
Optional: Stainless steel flange with 1/4" gas inlet and thermocouple feedthrough
|
- Standard: vacuum sealing assembly with 1/4" gas inlet and outlet. Fittings can be replaced by tube fittings or a KF25 port at an extra cost.
- Users may order a 1/4" Alumina tube for feeding working gas to the end of the quartz tube for better gas circulation.
-
|
|
Chamber Size
|
- Size: 4"x4"x4" or 100x100x100 mm
- Capacity: 65 cubic-inch or 1 liter
- Click on the picture to see the chamber size
|
|
Power
|
- 110V version: 950 W (Power cord is included)
- 220V version: 1.2KW (Power cord is not included)
|
Operating Temperature
|
- 1000°C max for an hour
- 900 °C for continuous operation
|
Max. Heating Rate
|
|
Temperature Controller
|
- PID automatic control and auto-tune function
- 30 programmable segments for precise control
- Built-in protection for the over-heating and broken thermocouple
- Large digital control panel (48 x 96 mm) for easy operation
- Temperature accuracy: +/- 1 °C
- Thermocouple: K type
|
Optional
|
- Two 8 mm diameter barbed fittings (gas inlet and outlet) (see pic on the left) at the back of the furnace panel are available at extra cost ($99 for both connectors). Check the option box
- Note: Self-Installation is required. The open barb holes and threaded holes will be ready
- Consumables: Heating module and thermal couple can be ordered by clicking underline
|
Overall Dimensions
|
- 250 x 305 x 350 mm (Without Flange)
- 250 x 450 x 410 mm (With Flange)
|
|
Net Weight
|
|
Dimensions
|
|
Shipping Weight
|
|
Warranty
|
- One-year limited warranty with lifetime support
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.
|
Application Notes
Pic. 1
|
- With its small footprint, low weight, and low power requirement, it can be easily accommodated in a glove box and threat samples under protective gas. Please click pic.1~3 to see details
- For high vacuum application ( <1e-5 torr), please choose a quartz tube with CF flange as in picture 4
- Pic.2 Pic.3 Pic. 4
|
Warnings
|
- Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Please put the furnace into the fume hood for better safety (Click Pic.1)
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
|
Operation Video
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships: MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|