|
|
Home Page
1100C Large Muffle Furnace (16 x 16 x 16", 64 L) with Digital Controller & Venting Port - KSL-1200X-L-UL
|
|
In stock
Item Number: KSL1200XL
Transported by LTL Freight (Truck)
|
SPECIFICATIONS
Note: Previous Model#KSL-1200X-L has been updated to Model#KSL-1200X-L-UL. (08/12/2014)
Structure
|
- Thermal efficient ceramic (high purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
- Heating elements on all three sides of the interior chamber for fast heating and enhanced temperature uniformity.
- Heavy duty double layer structure with the cooling fan to keep furnace exteriors safe to touch.
- Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
- 1/4'' Barbed Gas Inlet/Outlet installed on the back of the furnace
- An interlock is installed to cut off power as soon as the door is open
|
Chamber Dimensions
|
- 16 " x 16'' x 16'' （D x H x W） (40x40x40 cm)
- Capacity：64 liters/ 4100 cubic-inches/ 2.37 cubic ft
- Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
  
|
| Power |
- 7.5KW
- Power cord supplied without plug
|
| Current Rating |
34A |
Voltage
|
AC 208 - 240 Single phase, 50/60Hz
Note： Power cable included, but without the plug. Please install a plug by your own or click link below picture to choose a plug according to your country or your lab requirement
|
Operating Temp Range
 |
- 100-1100°C-Max. continuously
- 1200°C-Max. under an hour
- Note: for using =>1000°C, furnace block must be placed front chamber, see picture below.
|
| Stability at 1000oC |
+/- 1oC |
| Uniformity at 1000oC |
+/- 5oC |
| Max. Heating Rate |
20°C/ min |
Temperature Controller
 |
- FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- MET Certified
|
Temperature controller (optional)
 |
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
| Laptop, software & WiFi Control(Optional) |
- Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
-
 
|
| Furnace Weight |
275 LB |
| Product Dimension |
660mm L x 645mm W x 945mm H |
Shipping Dimensions
|
48" x 40'' x 54" (DxHxW)
|
| Shipping Weight |
425 Lbs (shipping by pallet) |
Warranty |
- One-year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance |
- CE Certified
- NRTL(UL61010) or CSA certification is available upon request at extra cost.
     |
Application Notes |
- For longer furnace service life, components, we recommend the heating rate not to exceed 10 °C /min.
- The cooling rate shall also not exceed 10 °C /min.
- This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
 click here to choose a crucible
|
| Operation Instructions |
  |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI-VISTEC Cylindrical Cell Pilot Line
MTI Sponsors the Postdoctoral Awards
Announcement:
MTI KJ Group Files Lawsuit Against Shangdong Gelon LIB Group for Copyright Infringement of MTI products and Manufacture & sale of counterfeit goods
MTI and Celgard have successfully reached a settlement under court for the litigation on patent and trademark
Upcoming Shows:
|
|