Browse Categories
Search

Hybrid Film Coater w/ Both Slot Die & Doctor Blade 150 / 200 mm Width - MSK-AFA-HDS-150


In stock
Item Number: MSKAFAIII-HDS150
Transported by LTL Freight (Truck)

MSK-AFA-III-HDS-150 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 320mm L x 100 - 150 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskite solar cells, fuel cell proton exchange membrane, and the battery electrodes.

SPECIFICATIONS
Working Power
  • 110 V or 208 - 240V AC selectable
  • 50/60Hz
  • 1000W
Film coater
  • Vacuum chuck made of Aluminum alloy with < 1.0 mm hole
    • Vacuum Chuck Dimensions: 200 mm(W) x 365 mm(L)  (8"W x 14"L)
    • The chuck is heated up to 120C by a digital temperature controller with +/- 1ºC accuracy
    • One vacuum pump is required, but not included please order separately.
  • One glass plate is included to coat slurry on a porous substrate, which can be sucked by vacuum chuck
    •                     (optional)
  • Moving Speed: One pushing bar is included for moving film applicator at speed  of 10 - 100 mm/sec variable
  • Moving Length: 10 - 350 mm adjustable by Adjustable Position Switch
Hybrid Coating Head


  • Film coating head consists of one fixed 150 mm width doctor blade and one 100 mm width removable slot die head ( click Pic. 1 below to see detail).
  • The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2)
    • Doctor blade: 150 mm width for minimum thickness of 0.010 mm film
    • Slot die: 100 mm width for minimum thickness of 0.005 mm film
    • Click the picture below right to order a spare slot die head with various width
              Pic. 1   Pic. 2   
 Digital Syringe Pump

  • Digital syringe pump with a easy to use control panel screen is included for slot-die coating
  • Holds small or big syringes up to 200 mL and remembers previous settings on power-up
  • Pumping rate: 1.963μL/min with a 10  μL syringe and 294.524mL/min with a 200mL syringe
  • The  movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min)
  • Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation

Options
  • In order to achieve better coating by the slot die, slurry's  Viscosity and dispersion are very important. (Pic.1)
  • Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 2) and find the best parameter for your coating (Pic.2)
  • Two channels heatable syringe pump (Pic. 3)
  • Pic. 1 Pic. 2 Pic. 3
    Compliance
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost
Warranty
  • One year limited warranty with lifetime support
Operation Video    (hybrid coating head)
Dimension & Net Weight    60 kg net weight
Shipping Dimensions 48"(L) x 40"(W) x 37"(H)
Shipping Weight 200 lbs

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

APS March Meeting 2024 March 4 - 8 Minneapolis MN Booth 629

TMS 2024 March 3 - 7 Orlando FL Booth 406

International Battery Seminar Exhibit March 12-15 Orlando FL Booth 1320

ACS Spring 2024 March 17-20 New Orleans LA Booth 3338

Recent Attended Shows:
AABC USA 2023 December 11-14 San Diego Booth 107

2023 MRS Fall Meeting Nov 26 - 30 Boston MA Booth 901

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.