Browse Categories
Search

120ºC Max. Film Coater w/ Heatable Vacuum Bed (12"Wx24"L) & 250mm Doctor Blade - MSK-AFA-II-VC-FH


Transported by LTL Freight (Truck)

Product Options

Working Voltage:

Personalization

Oilless Vacuum Pump OFP (+ USD$699.00)
MSK-AFA-II-VC-FH is a CE Certified larger size automatic film coater with a heatable vacuum bed up to 120ºC. It is designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a stable driving system to promote a smooth coating with all types of materials. The pin holes on the bed can hold the substrate sheet on the bed via a vacuum. This is very helpful when performing coating on the thin substrate. It is an ideal tool for ceramic tape casting and Li-Ion battery electrode coating.

SPECIFICATIONS
Working Voltage
110VAC or 208~240VAC, 50/60Hz (please select one in the voltage option bar)
Max. Power Consumption 2050W

Traverse Speed
  • 10 - 100 mm/sec variable [Without any load, the read traverse speed is around 90 mm/s when the speed is set as 100 mm/s. Therefore the real speed for coating should be calibrated by customer themslves by using a ruler and stop watch]
  • Accuracy: 10mm/sec
  • Controlled by 24 VDC motor. 
Stroke Length 10 - 530 mm adjustable by using Adjustable Position Switch
Max. Coating Dimensions 250mm(W) x 530mm(L)
Heated Vacuum Bed
  • A heated vacuum bed is made of aluminum alloy with a micro-size hole
  • Vacuum Chuck Dimensions: 600mm(L) x 300mm(W)
  • Heating elements are built inside the vacuum bed for a uniform heating up to 100ºC Max. 
  • Precision digital temperature controller with +/- 1ºC accuracy
Film Applicator
 
         Pic. 1                      
Pic. 2
  • One 250 mm width Micrometer Adjustable Film Applicator is included, with adjustable thickness from 0.01 mm - 5 mm (Pic. 1)
  • Traverse Pusher is included for pushing the doctor blade to ensure constant speed coating
  • Note:  Thinnest film can be achieved is > 10 micron
  • Optional hybrid film applicator of Blade and Slot die is available at the extra cost ( Click Pic 2 to see specs)
Vacuum Pump (Optional)

Product Dimensions

Open Cover:     1100mm(L) 450mm(W) 990mm(H)
Closed Cover:   810mm(L) x 450mm(W) x 320mm(H)
Compliance CE certified
NRTL or CSA certification is available upon request at the extra cost
Warranty One year limited warranty with lifetime support
Operation Manual & Video       




Application Notes
  • Pic.1 & 2 show coated cathode for Li-Ion battery. Please click here to see how to coat an electrode sheet.
  • It is recommended to operate the coater under a fume hood. (Click Pic.3 for detail.)
  • You need a vacuum mixer to remove air bubbles from slurry to make uniform coatings (Click Pic.4)
  • You may need a Slurry Viscosity Tester to make coatings consistent (Click Pic.5 for detail.)
  • You may need a vacuum oven to dry the films and remove the binder after coating. (Click Pic.6 for detail.)
  • Rolling pressing is necessary to ensure good density and adhesion of electrode materials to the current collector substrate after coating. Please select a rolling press from here. (Click Pic.7 for detail.)
               
      Pic.1               Pic.2                   Pic.3                 Pic.4                   Pic.5                Pic.6                     Pic.7                          
DIY ideas or options                                        
 Ultrasonic coater     ----             Roll to roll                            
Electrospinning coater   -      - Roll to Roll
Net Weight 30 kg (67 lbs)
Shipping Dimensions 48"(L) x 40"(W) x 37"(H)
Shipping Weight 190 lbs

STANDARD PACKAGE
Item Description Qty
1 Large Automatic Film Coater 1
2 Traverse Pusher 1
3 Micrometer Adjustable Film Applicator - 250 mm (film casting doctor blade) EQ-Se-KTQ-250 1
4 Power Cable (Note: 220V Power plug is not included. Please click here to order) 1
5 Waste Plate 1
6 120L/min Oilless Vacuum Pump  optional

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

2024 MRS Spring April 22-26 Seattle WA Booth 315

AABC Europe May 13-16 Strasbourg France Booth 408

245th ECS Meeting May 26-30 San Francisco CA Booth 108

Recent Attended Shows:
ACS Spring 2024 March 17-21 New Orleans LA Booth 3338

41st International Battery Seminar Exhibit March 12-15 Orlando FL Booth 1320

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.