Large Tape Casting Sheet Coater (14”Wx40”L) w/ 120°C Heat-able Vac. Bed & Doctor Blade- MSK-AFA-L1000

  MSK-AFA-L1000 is a 350mm width and 1100mm long tape casting coater with the heat-able vacuum chuck up to 120°C and a micrometer adjustable applicator. It is designed for producing long thick film and has a unique driving system to produce smooth coating at all types of materials. It is specially designed for coating various electrodes of a cylindrical cell such as the 21700 formats. 

Power	220V AC +/- 10%, 50/60Hz, single phase 3100W
Traverse Speed	28 - 90mm/sec adjustable
Stroke Length	29 - 930mm
Vacuum Platform	Aluminum alloy flat vacuum chuck with flatness +/- 10 microns Vacuum chuck Dimensions: 1100mm (L) x 350mm (W) x 25mm (H) Max. heating temperature: 120°C Precision temperature controller with +/- 1ºC accuracy. Tip: For drying the coated Li-ion battery electrode sheets (usually 80°C is required), simply set the target temperature in the temp. controller, close the lid, and wait for the slurry to be dried.
Vacuum Pump (Optional) (The oilless pump was removed from the standard pack since 02/26/2016)	A vacuum pump is required, but not included Please order CE Compliance 120L/min Oilless Vacuum Pump
Film Applicator	Built-in pushing bar for using micrometer adjustable applicator 300 mm width Applicator with micrometer adjustable head included making coating up to 1000mm(L)  A hybrid slot die film applicator is available upon request
Max. Coating Area	1100mm (L) x 350mm (W)
The accuracy of Film thickness	+/- 0.01mm
Application Notes	Pic.1 and 2 show coated cathode and anode for Li-Ion batteries. Please click here to see how to  It is recommended to operate the coater under a fume hood. (Click Pic.3 for detail.) May need a vacuum mixer to remove air bubbles inside slurry to make uniform coatings (Click Pic.4 ) You may need a Slurry Viscosity Tester to make coatings consistent (Click Pic.5 for detail.) You may need a vacuum oven to dry the films and remove the binder after coating. (Click Pic.6 for detail.)  Pic.1    Pic.2  Pic.3Pic.4  Pic.5       Pic.4
Heating Vacuum Bed	Bottom Heated vacuum chuck  Max. working power: 3000W Max. heating temperature: 120°C Precision temperature controller with +/- 1ºC accuracy. Tip: For drying the coated Li-ion battery electrode sheets (usually 80°C is required), simply set the target temperature in the temp. controller, close the lid and wait for the slurry to be dried.
Machine Dimensions	1245mm (L) x 500mm (W) x 670mm (H) (Max Height)
Net weight	60 kg
Shipping Dimensions	58" x 40" x 35"
Shipping Weight	400 lbs
Compliance	CE certified NRTL or CSA certification is available upon request at the extra cost. (base on UL61010/SPE-1000 regulation).
Warranty	One-year limited with lifetime support
Operation Video