• 110VAC  or 208 - 240V AC 50/60Hz selectable from product option
• 1500W 

• Slot die head fixtures with coating widths of  50mm and 100 mm are available in the product options bar

     

     

Syringe Pump

• Digital Controlled Infusion Syringe Pump and connection pipe are included
• Displays total volume dispensed in mL or µL units
• The maximum pumping rate of  25 mL/hr with a 60 mL syringe
• Precise reproducible flow rates
• Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min
• Click the picture left to see detailed specs.

Micrometer Head
      

• One micrometer head is a built-in travel rod of the coater to adjust the gap between slot die and substrate
• A digital micrometer head is available as an option at an extra cost
• Digital Micrometer Head 1" Travel 0.003 mm Accuracy

• Travel Speed:        0 - 80mm/sec variable
• Travel distance:     0 - 400 mm  adjustable

• Please click the checkbox to order a 120L/min Oilless Vacuum Pump for holding the glass plate on the vacuum chuck easily ( Clic Pic. 1 to order)
• In order to achieve better coating by the slot die, the slurry's  Viscosity and dispersion is very important, please click picture 2 below to order the Viscosity meter and dispersing machine ( Pic. 3)  and find the best parameter for your coating
• Top UV drying cover is available at extra cost for UV-sensitive material. ( Pic. 4)
• Warning: You shall put the coating machine inside of fume hood  ( click Pic 5 to order )

  Pic. 1Pic. 2Pic. 3    Pic. 4    Pic. 5

• Coating thickness is not dependent on or equal to the gap between the slot die head and substrate. 
• Usually, the gap shall be larger than the coating thickness. Coated thickness is strongly dependent on slurry viscosity, coating speed, and flow speed.  ( Lower viscosity, low flow rate, and low speed will result in a thinner film。 Please practice finding the best parameters which suitable for you
• Example：  5% carbon+ polymer,  viscosity: 500mPa·s,  substrate: Al foil of 16 um,
• Gap: 200 um,  Slurry feeding rate:: 0.1 ml/minute , Coating speed: 12mm/s
• Coated film thickness:  10 um +/- 2 um

• PNNL micro battery application: A reliable sealing method for micro batteries
• Building better micro batteries: from fundamental research to manufacturing