200C 8" Width Heated Rolling Press with Variable Speed (Ar Gas Compatible) - MSK-HRP-04

Effective Cylinder Width

200 mm

• High strength hardening steel with hardness with RC > 52 
• The Roller surface is plated by Cr for anti-corrosive
• Size:  96 mm Dia. x 220mm W
• Note: The benchtop rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.

Roller Gap

• 0~1.2 mm adjustable
• Note: The gap tolerance may vary with temperature raising as below
• RT-100°C: 0.008 - 0.01 mm
• 100 - 150°C: 0.02 - 0.03 mm
• 150 - 200°C: 0.03 - 0.05 mm

Mechanical Dial Gauge (Included)

Range: 0 - 3mm
Accuracy: 0.01mm

Upgradable Digital Micrometer
(Not Included)

Digital Micrometers are available at an extra cost:
Range: 0 - 12.7mm
Accuracy: 0.004mm

• A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of  0.1 mm
• A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
• A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm

• Two digital temperature controllers with 30 segments programmable for control two rollers separately
• 200°C maximum.
• Recommended Heating Rate: 1.3°C/minute
• Two heating elements are installed
• Power of each Heating Element:  1000W （ total 2000W)
• Temperature Control Accuracy: +/-5°C
• The heating rod is consumable.  Please click the picture left to order

Power

Motor

• High torque motor with reducing gear, which can run under Ar gas safely
• Rated power 100W
• Digital speed  Display: 0~26 mm/s (real linear speed of rollers)

Weight

100kg

Shipping Weight

308 lbs

• CE Certified
• MET certificate is available upon request at extra cost.
• One year limited warranty with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

• Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only)
• Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrode with different packing densities

• Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
• Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
• Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with sheet original thickness.
• Never calendering decrement over 0.02mm compared with original sheet thickness each calendering.
• Never roll materials with hardness > 45HRC
• Clean roller surface for each rolling and Use acetone to clean and lubricate  when not use to avoid corrosion
• It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).