|
|
Home Page
250°C 200mm Width Hot Rolling Press with 10 mm Adjustable Gap - MSK-HRP-05
|
|
Please email for lead time
Item Number: MSK-HRP-05
Transported by LTL Freight (Truck)
|
MSK-HRP-05 is a 200 mm width Heated Rolling Press with Max. 10 mm rolling gap and Max. 250℃ working temperature, which is designed for preparing the polymer composite materials. ( Gap is increased to 10 mm since Jan 15, 2022 )
SPECIFICATIONS:
|
Effective Rolling Width
|
200 mm
|
| Roller Material & Size |
- High strength hardening steel with hardness with RC > 52
- The Roller surface is plated by Cr for anti-corrosive
- Size: 96 mm Dia. x 220mm W
|
|
Roller Gap
|
- 0~ 10 mm adjustable
- Note： The gap tolerance may vary with temperature raising as below
- RT - 100°C: 0.008 - 0.01 mm
- 100 - 150°C: 0.02 - 0.03 mm
- 150 - 250°C: 0.03 - 0.05 mm
|
|
Dial Gauge Accuracy
|
0.01mm |
Rolling Thickness &
Hardness |
- Min. 0.01 mm
- Max. 10.0 mm
- Max. the hardness of sample to be rolled: < 40 HRC
|
Heating Temperature
|
- Two digital temperature controllers with 30 segments programmable for control two rollers separately
- 250°C maximum ( <= 1 hrs suggested)
- Recommended Heating Rate: 1.3°C/minute
- Two heating elements are installed
- Power of each Heating Element: 1000W
- Temperature Control Accuracy: +/-5°C
- Two spare heating rods are included for replacement. Pls click pic left to see specs.
|
|
Power
|
|
|
Motor
|
- High torque motor with reducing gear, which can run under Ar gas safely
- Rated power 100W
- Digital speed Display: 0~26 mm/s
- Digital controlled with constant output power
|
|
Options
|
|
Dimensions
|
- 620mm(L) x 280mm(W) x 470mm(H)
- Shipping Dimensions: 40" x 30" x 25" (D x W x H)
|
|
Weight
|
100kg
|
|
Shipping Weight
|
280 lb
|
Compliance & Warranty |
- CE Certified
- MET certificate is available upon request at extra cost.
- One year limited warranty with lifetime support
- Rusting and damage due to improper storage conditions or maintenance are not covered by a warranty
|
| Demonstration Video |
|
| Warnings |
- Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
- Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with the sheet's original thickness.
- Never calendering decrement over 0.02mm compared with original sheet thickness each calendering.
- Never roll materials with hardness > 40HRC
- Clean roller surface after each use and lubricate rollers when not used to avoid corrosion
- It is not allowed to use any MTI product in Class I environments (flammable gasses & vapor).
|
|
Sale Price: Starting at USD$3,998.00
|
|
|
|
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|