Browse Categories

200°C Vertical Hot Rolling Press ( 4") w/ Asynchronous Rolling Speed & Pressure Display- MSK-HRP-22

Please email for lead time
Item Number: MSK-HRP-22
Transported by LTL Freight (Truck)

MSK-HRP-22 Vertical Hot Rolling Press features a pair of 100mm wide steel rollers with Asynchronous rolling speed control up to 200°C.  The separated control unit features a touch screen control panel. 

Its vertical rolling position allows users to "gravity feed" flexible films and produces shear force during rollingSuch a compact calendar machine can be put in Ar gas glove-box and is very useful for preparing flexible or dry battery electrode sheets for Li-ion / Soli Metal-Air battery research



  • AC 220V,  Single phase,  50/60Hz, 1500 Watts 

  • Roller Size:                     100 mm Dia. x 100mm W
  • Effective Cylinder Width: 96mm
  • Roller hardness:              HRC 52
  • The thickness of rolling:  0~1.8 mm adjustable
  • Warning:  Never roll materials with hardness >40HRC because rollers are softened at 200℃.
  • Optional: 2-3 layer vertical rolling machine is available upon request at the extra cost
  • Roller Material: CrMoV        
Temperature Control


  • Two independent temperature controllers enable dual-zone temperature control for the front and rear rollers.
  • Temperature range: RT - 200°C with 30segments programmable
  • Temperature accuracy +/-5°C
  • Max heating temp: 200°C <30min
  • Continuous heating temp: 190°C
  • Two heating elements are installed
  • Power of each Heating Element: 500 Watts
  • The heating rod is consumable. Please click the picture left to order a replacement
  • Heating Rate:
    • RT-100°C: ~3°C/min
    • 100-150°C: ~2.5°C/min
    • 150-200°C: 1~2°C/min
Rolling Speed

  (Pic. 1)                            (Pic. 2)
  • Two high torque 24VDC brushless motors to control the rollers independently. 
  • Speed control: 0.5-12.5 RPM adjustable via touchscreen
  • Actual rolling speed: 2.6~65 mm /sec (Actual Speed = display value * 0.65 )
  • Two rollers are aligned horizontally and supported by the steel frame. Such a design allows users to gravity-feed flexible materials front above the rollers and collect them at the bottom. (Pic. 1)
    Independent speed control for upper and lower rollers.
  • Digital control with constant output power 
Pressure Indication
  • Digital pressure display with a built-in load cell. 
  • Pressure display: max pressure and real-time pressure.
  • 0 ~ 2T (the unit display is Kgforce) depending on the gap 
Digital Gauge 
(Roller Gap)
  • Resolution:  0.001mm
  • Manual adjustment for rolling gap
Control Units

  • Separated Control Unit to control all parameters, including
    • The touchscreen panel controls
    • Two rolling speeds, ( 0.5-12.5 RPM)
    • The temperatures control for two rollers independently with 30-segment programmable
    • The pressure display during the rolling
  • RS485 port and PC operation software is available at the extra cost

  •  Click the picture to see the details
Material Feeder
(Optional Purchase)



Shipping Weight & Dimensions

  • 330 lb
  • 47"x39"x39"

Compliance & Warranty
  • CE Certified
  • NRTL or CSA certificate is available upon request at extra cost.
  • One year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Instructions      
  • Never roll materials with hardness > 40HRC
  • The rolling machine can be used in the Ar gas environment.
  • Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with the sheet's original thickness.
  • Never calendering decrement over 0.02mm compared with original sheet thickness each calendering.
  • Clean the roller surface before and after each rolling process. Lubricate the roller surface when the machine is planned for idle to avoid corrosion.
  • It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:

2024 MRS Spring April 22-26 Seattle WA Booth 315

AABC Europe May 13-16 Strasbourg France Booth 408

245th ECS Meeting May 26-30 San Francisco CA Booth 108

Recent Attended Shows:
ACS Spring 2024 March 17-21 New Orleans LA Booth 3338

41st International Battery Seminar Exhibit March 12-15 Orlando FL Booth 1320

Click here to see our past conferences

1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.