Browse Categories
Search

High Throughput Coin Cell Assembling System Up to 64 Cells Per Hour For Battery Research - MSK-HTBA


Please email for lead time
Item Number: MSK-HTBA
MSK-HTBA  is an automatic coin cell assembling system for high throughput battery material research, which can handle 8 kinds of battery cathode and the anode electrode and  2 kinds of electrolytes and assemblies 64 cells per hour in dual size glove-box with under controlled atmosphere.

Features

  • High Throughput & Automatically Assembly in the dual size of glove-box.
  • CR 2032 Coin Cell or Half Cell
  • 8 Kinds of Anode
  • 8 Kinds of Cathode 
  • 2 Kinds of Liquid Electrolyte
  • Productivity: 64 PPH
  • Product Rate: 98%
  • Tracking System
Flow Chart
  • Top Case Loading
  • Lithium Chip / Anode Loading
  • Separator Loading
  • Cathode Loading
  • Spacers / Springs
  • Electrolyte Injection
  • Bottom Case Loading
  • Pressure Control Electric Crimping
Voltage & Power
  • AC 380V +/- 10%, 50 Hz, Three Phases
  • Maximum Power: 2 kW 
Utility Requirements
  • Temperature: 25ºC +/- 3%, Humility: 30 - 90 RH%
  • If without the glovebox, it requires the dry room with dewpoint below - 40ºC
  • 0.5-0.8 MPa dry compressive gas
Battery Materials Requirements
  • Cathode: 13 mm in diameter, 0.1 mm thickness
  • Anode: 14 mm in diameter, 0.09 mm thickness
  • Separator: 16.5 mm in diameter, 0.1 mm thickness
  • Spring: 15.4 mm in diameter
  • Spacer: 15.5 mm in diameter, 0.5 mm thickness
  • Bottom case: 19.4 mm in diameter, 2.84 mm thickness
  • Top case: 16.5 mm in diameter, 2.6 mm thickness
Modules
  • XYZ automatic working station, X 1100 mm * Y 800 mm * Z 200 mm
  • Dual chambers glove box, Four working positions
  • Sample materials loading
  • Electric crimping, pressure 50 - 80 kg/cm^2
  • PLC digital control
Coin Cell Type
  • CR 2032
  • Any other coin cell size die set could be customized at the extra cost
Channels
  • 8 x 8 layout
  • 64 channels in total
Production Yield
  • 1 - 2 PPM
Accuracy
  • Assembly Deviation: +/- 0.5 mm
  • Electrolyte Injection Accuracy: 0.5 uL
Dimensions & Net weight
  • Main glove box chamber size: L 1400 mm x W 1200 mm x H 900 mm
  • Dimensions of the system:  L 3200 mm x W 1200 mm x H 900mm
  • Net Weight: 1200 lbs
Optional

  • The number of cathodes, anodes, separators, and liquid electrolyte might be customized based on the demand.
  • The programmable PC control and software design might be customized upon request
  • Any size of coin cell dies set could be customized at the extra cost.
  • The system can be built for dry room operation without glovebox.
Warranty
  • One year limited by lifetime support
Compliance
  • NRTL certification is available upon request at the extra cost.
Operation Instructions      
 

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
AABC 2019 Jun 24-27 San Diego CA Booth 28

ICT/ACT 2019 Jun 30 - July 4 Gyeongju South Korea

MS&T 2019 Sep 29 - Oct 3 Portland OR

Recent Attended Shows:
2019 MRS Spring April 22 - 26 Phoenix AZ Booth 501

36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL


TMS 2019 March 10-14 San Antonio TX


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.