Multi-functional Nano-fiber Electrospinning System with (2 x 5 Channels) Pumps & 2 Collectors - MSK-NFES-1U

     MSK-NFES-1U is a cost-effective & user-friendly, multi-functional bench-top electrospinning system. It provides two 5-channel syringe pumps, which allows 10 nozzles installed at the same time. The high voltage DC power supply delivers a 0-30 kV output voltage range with a maximum current capacity of 1 mA.  A stationary plate collector and rotating drum collector are included along with the unit.  
    MSK-NFES-1U fume hood provides an enclosed atmosphere with transparent side walls to monitor the electrospinning process. Inside the fume hood, an exhaust fan is installed which can provide dehumidification. Also, a humidity monitor is installed to monitor temperature and humidity. 
    MSK-NFES-1U is an excellent electrospinning system to explore a wide range of material or composite.

SPECIFICATIONS

Input Power	100~240 VAC, single-phase, 50/60 Hz Max power consumption: 280 W NRTL certified Power Adaptor for 100~240 VAC to 24 VDC (rated 70W)
High Voltage Power Supply	24VDC input for safe operation 0 - 30 kV single output, 1 mA max current Digital voltmeter and current meter Constant current / constant voltage modes available
Dual-Channel Syringe Pump	Two syringe pumps are installed with the independent operation Each pump can install 5 nozzles for spraying at the same injection rate at the same time. Pumping rate: 0.01 mL/h ~ 99.99 mL/h adjustable for each pump 10 nozzle can injection at the same time for a different solution.
Swing Fixture	Swing head is built inside the hood with adjustable speed by the control panel Oscillation distance:   0 - 280 mm    adjustable Oscillation speed:       0 - 300 mm/minute adjustable  Total 10 nozzles can be installed on the fixture and injection during oscillation  Rach nozzle will connect to the syringe pump via the included 3 mm dia. plastic pipes
Injection Nozzles	12 Nozzles with 0.34mm I.D. which is made of stainless steel.  One piece of co-axis nozzle with dual inlet is included, which allows you to inject two kinds of the fiber-forming solutions in one nozzle (  click Pic. 1 & 2 below ).  The extra co-axis nozzle is available at the extra cost.   Pic. 1         Pic. 2
Plate Collector        Pic. 1                                Pic. 2	Two types of collectors are included as a standard accessory  Mandrel collectors for electrospinning (Pic. 1) Size: 76mm length x 200mm Dia. Speed: 1 - 1000 rpm (can be upgraded to high-speed collector: max 4500 rpm) Plate collector for nanofiber-collecting (Pic. 2)  ( insert to mandrel collector without mpving ) 230 mm x 230 mm x 4 mm thick stainless steel plate with grounding
Fume Hood	A small unit of a fume hood with nozzles, collector, fan system, and lights inside Transparent glass windows on the front and both sides for easy monitoring of the electrospinning process Footprint: 560 mm (L) x 480 mm (W) x 590 mm (H)
Controller	A touch screen controller which controls pumping speed, collector rotary speed, nozzle moving speed, and exhaust fan
Humidity Monitor	A humidity monitor is integrated into the fume hood for monitoring the humidity level (RH%) ranging from 2% - 95% (Click left picture for more details)
Warranty	One-year limited warranty with lifetime support (demo before purchase available)
Compliance	CE certified NRTL or CSA certification is available upon request
Dimensions	560 mm (L) x 480 mm (W) x 730 mm (H) Weight: 40 KG
Operation Instructions Video
Reference Article	Electrospinning of Nanofibers from Polymer Solutions and Melts  Transparent air filter for high-efficiency PM2.5capture Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries
Application Notes	Be cautious of using hazardous materials. The working chamber of this unit is not flame-proof, explosive proof or vacuum-sealed. Contact your health and safety department manager for detailed material handling instruction. If you need a vacuum-sealed safety chamber please consider the MSK-USP-06.