Advanced Planetary Ball Mill w/ Independent Speed Control and Optional Hi-throughput Milling Jars - MSK-SFM-15

Features

• Independent speed control for revolution (10 - 400 RPM) and self-rotation (50 -1600 RPM)
• Touch screen control panel for programmable milling recipes. 
• Four 500 mL stainless steel jars are included

Power

• 208 - 240V AC,1p, 50/60 Hz
• 2500 W
• 10-ft power cord without a power plug. 

Milling Speed and centrifugal acceleration

• Main revolution: 10 - 400 RPM;          Centrifugal acceleration:  <16 g 
• Self-rotation:      50 - 1600 RPM;        Centrifugal acceleration:  <120g
• Total Centrifugal acceleration:  <136 g
• Recommended speed ratio: 1 - 3
• Maximum milling allowance for the wet mill (Total weight of samples and milling media):
• <2000 g @ revolution < 350 rpm
• <1000 g @ revolution < 400 rpm
• The total load for the dry mill is half of the wet mill. 

Touch Screen Control

• Programmable milling process includes milling time and milling speed. 
• 10 recipes
• 8 segments of speed control per recipe
• up to 30 minutes per segment. 

Recommended Material Size

• Intake size:   < 3 mm for most materials;
                       < 10 mm for brittle materials
• Output:         < 1um average @ wet mill;
                       < 20um @ dry mill

Milling Jars

• Four 500 ml stainless steel jars with SS milling ball combo are included.  ( Pic. 1 & 2）
• Other milling jars and milling media are also available. 
• Hi-throughput milling tanks ( 8x25 ml jars) are available upon request, which can mill 32 samples per batch. （Pic.3)
• 500 ml vacuum jars is available for air-sensitive materials (Pic. 4)
• Pic.1                Pic. 2      Pic. 3   Pic. 4

Noise Level

55~85 decibel

Locking Fixtures

• Four sets of locking fixtures are included
• Easy to tight for max. jar securing. Can hold jars with heights up to 80mm

  Warranty

• One-year limited warranty with lifetime support
• Consumable parts, such as milling jars and grinding balls are not covered by the warranty
• The milling machine must be placed on solid flat ground to avoid damage, which is not covered by a warranty

  Compliance

• CE Certified
• NRTL certification is available at extra cost

  Production Dimensions & Weight

• 530mmW×670mmL×1300mmH   ( close cover )
• 530mmW×670mmL×1620mmH    ( open cover )
• ~245kg

  Operation  Video

         Demonstration Video           Milling Jar Installation

   Application Notes
    

• SS304 mixing jar is suitable for grinding various metal materials.
• To avoid contamination,  please pre-milling the material 2-3 times before normally milling, which can make a coating on the surface of the jar and balls.   Please use one jar for one type of material.
• For milling the oxide material, please choose alumina/Nylon jars and zirconia media. DO NOT USE stainless steel balls in Alumina jars. 
• Must place 4 jars or 2 in symmetrical with similar weights in the ball mill to keep balance during rotation, If using one jar, you must put another jar with the same weight in a symmetrical position.  Otherwise, unbalance rotation, especially one jar, may damage the machine.
• Please click underline to learn Centrifugal Force calculation.

  Shipping Weight & Dimension

 650 lbs, 35"L x 30"W x 55"H