|
|
Home Page
High Energy 3D Ball Mill with One Jars (80ml SS, 2 Yrs Warranty) -- MSK-SFM-3
|
|
In stock
Item Number: MSKSFM3
Transported by LTL Freight (Truck)
|
MSK-SFM-3 is a compact high-speed ball mill with a 3D movement for making a small number of samples at ease and fast. It has higher impact energy created by rotation, vibration, and oscillation with frequencies up to 1200 rpm with a two-year warranty. The MSK-SFM-3 can be used either dry or wet to mill materials and mix all kinds of solids, suspended liquids, and pastes with different sizes and materials. A stainless steel milling jar is included for most of the materials. It is an ideal choice to make small quantity samples in material and chemical research laboratories.
SPECIFICATIONS:
| Features |
- 1200 max. RPM allows efficient pulverization and homogenization
- The range of jar materials (Nylon, Alumina, SS, and Agate) offered for various applications
- Easy jar installation
- Optional for variable speed (eg: MSK-SFM-3-F) and forced chilling air cooler (additional cost upon request)
|
Standard Milling Jars & Media
|
|
Power Input
|
- Single-phase 208- 240VAC 50/60Hz
- 300W Max.
- A 750W transformer can be used for 110V.
- The transformer is not included, please order at extra cost.
|
| Oscillation Frequency |
- 1,200 RPM (Please see the video below for a performance of the jar rotation)
- Estimated acceleration gravity: ~ 70g
- Note: 1500 RPM version is available upon request at extra cost, which provides > 100G force.
|
| Timing Range |
- 0 to 30 minutes for built-in mechanical timer
- Warning: Running time for the mill should be less than 30 minutes, otherwise, the mill may overheat.
|
| Feeding |
- Volume: 1/3 of the capacity of the ball milling tank
- Feeding Granularity: <1mm
|
Discharging Granularity
|
D50 0.1 micron minimum for oxide ceramic materials ( see pic. left )
Note: To achieve finer or desired particles via ball mill is a research project, which is dependent on the material to be milled, grinding time and speed, combination of grinding jar and milling ball, etc. It is the user's responsibility to find the best milling procedure based on the material. Buyers are welcome to the MTI laboratory in California to test before purchase. |
| Noise Level |
87dBA (standing at 1ft with the machine lid open and SS milling balls in the jar) |
| Compliance |
|
| Warranty |
- Two years limited warranty for parts with lifetime technical support (after June 1, 2017)
- Alumina jars are not covered by the warranty.
|
Operation Video
|
  
|
Optional Air Cooling
Forced cold air
|
- If the user needs to force conditional air cooling for some ductile materials, please click to order a Portable Spot Air Cooling Conditioner, which will keep the milling jar temperature low. ( click picture left ). It is a cost-effective way to achieve the required particle sizes and production rates for heat-sensitive or tough-to-mill materials.
Air Cooling Conditioner Test with Nylon Jar Zirconia Balls
|
Milling 30 mins |
Milling 60mins |
| The temperature of the jar without Air Cooling |
45°C
|
65°C |
| The temperature of the jar with Air Cooling |
35°C
|
45°C |
- Optional jars and grinding balls are available in the product options bar.
    
SS vacuum jar 50ml alumina jar Alumina balls 80ml acrylic jar Zirconia Jar
|
| Application Notes |
- Attention: To achieve the best grinding effects, it is suggested to use milling balls with a diameter of less than 10mm for a 50ml alumina jar
- Tips for choosing proper jars and milling media for milling and grinding application:
- SS mixing jar is suitable for grinding various metal materials
- For milling the oxide material, please choose Nylon or alumina/zirconia jar and media
- Please consider our SYU-3 Ultrasonic Filtration System for filtering the product.
- DO NOT USE stainless steel balls in Alumina jars or vice versa to avoid contamination.
- Please use N2 gas if it operates inside of the glove-box, do not use Ar gas
- Bulk samples must be crushed before grinding. Please consider MTI Jaw crusher ( click pic below right )
-
   
|
Overall Dimensions
|
   - Mill: 386mm(L) x 517.5mm(W) x 283.5mm(H)
|
| Net Weight |
40 kg (88 lbs) |
| Shipping Dimensions |
27"(L) x 23"(W) x 24"(H) |
| Shipping Weight |
135 lbs |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|