|
|
Home Page
1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating Function - MSK-USP-SP-LD
|
|
In stock
Item Number: MSKUSP-SP
|
MSK-USP-SP-LD is a 1.7 MHz Ultrasonic Particle Generator with a digitally controlled infusion syringe pump and a temperature controller. It can be used in line with MTI Tubing Furnaces to form a versatile synthetic system for nanostructured oxide materials.
SPECIFICATIONS
| Voltage |
- 110 - 240VAC for universal use
- 24VDC driving ultrasonic generator
|
System Features
|
- A 316 Stainless Steel liquid container is equipped with a fluoropolymer sealing ring and a heating tape
- 1.7 MHz ultrasonic generator
- 3 levels of power output ( low, middle, high)
- Droplet size: < 10 microns, which is dependent on the viscosity of solution, ultrasonic frequency, gas speed.
- Continuous mode and timed mode can be set. For timed mode, time can be adjusted from 30 minutes to 180 minutes
- The quick clamps allow easy removal of components for cleaning or adapting the device with simple connections to the gas supply
- A liquid injection pump is included and equipped to inject automatically which comes with a 60 ml plastic syringe.
|
Digital Syringe Pump
|
- Holds small or big syringes up to 60 mL
- Pumps continuously until you stop the pump
- The infusion rate can be changed while pumping
- Remembers previous settings on power-up
- Power failure mode allows the pump to continue pumping after a reset
- Displays total volume dispensed in mL or µL units
- The maximum pumping rate of 25 mL/min with a 60 mL syringe
- Precise reproducible flow rates
- Selectable infusion rate units: mL/hr, µL/hr, mL/min, µL/min
- Infuses Only, does not withdraw, volume target, or have a computer interface
- An infusion Syringe Pump with an optional Heatable Glass Syringe is available at an extra cost
|
Temperature Controller
 |
- The controller uses PID via SSR power control
- Single-point setting controller
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- A K-type thermocouple with 3mm OD x 4" L is included in the standard package.
|
| Heating Tape |
- Length: 24"
- Width: 1/2"
- Input Voltage: 120V AC
- Max Power: 105W
- Max. Working Temperature: 250°C
- Electric insulation Fiberglass
- Power Plug: included
|
| Application Notes |
- An MFC can be connected to the upstream to control the carrier gas flow rate. ( Pic. 1)
- The ultrasonic particle generator can be used in line with MTI Tubing Furnaces and Electrostatic Precipitators to form a versatile synthetic system for nanostructured oxide materials. Please click picture 2 to view the details
 Pic. 1  Pic. 2 |
Dimension
|
- Control Unit: 260mm (L) x 190mm (W) x 90 mm (H)
- Liquid Syringe: 223mm (L) x 147mm (W) x 120mm (H)
- Ultrasonic Particle Generator: 150mm (L) x 150mm (W) x 210mm (H)
|
| Compliance & Warranty |
- NRTL or CSA certification is available upon request on request at an extra cost.
- One-year limited manufacturer warranty with lifetime support (consumable parts such as O-rings are not covered by the warranty)
|
Operation Video
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|