|
|
Home Page
Hi-Pressure Super Alloy Tube with Flange: OD30x ID12x L580 (mm), Max.1100oC - Tube-HP-30-12-580
|
|
In stock
Item Number: TGH30D580
|
Ni-based superalloy tube vessel (30mm O.D x 12 mm I.D x 580 mm L). It can be used under ultra-highly oxidizing and inert gas atmosphere up to 1100°C to process special compounds. It is consumable part of OTF-1200X-HP-30A which is a compact HIP (hot isostatic pressure) furnace for researching the new generation of materials at low cost.
Specification:
| Outside Diameter: |
30 mm |
| Inside Diameter: |
12 mm |
| Tube Length: |
580 mm |
| Weight: |
9.35 lb |
Max. working temperature
without load: |
1100 °C |
Working Pressure
&
Temperature: |
Maximum pressure inside the tube
|
Heating temperature
|
| Max. 2900 PSI (20 Mpa) |
800°C |
| Max. 1740 PSI (12Mpa) |
900°C |
| Max. 870 PSI (6 Mpa) |
1000°C |
| Max. 580 PSI (4 Mpa) |
1100°C |
Warning:
- Please set up a pressure alarm point in the digital pressure display before the operation
- Must install a pressure regulator on the gas cylinder to increase pressure gradually.
- Service life depends on the maximum operating temperature and sample used. The high-pressure vessel is a consumable part, please order replacement once observed deformation.
|
| Standard package |
Name
|
QTY |
| Ni-based superalloy tube vessel) |
1 set |
| Flange |
1 set |
| Bolts |
1 set |
| Copper Ring |
1 set |
|
| Optional Accessories |
  |
| Installation: |
 |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|