Browse Categories
Search

1.6mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 300 mm) - EQ-bcnf-16m


In stock
Item Number: bcnf-16m

Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (1m length x 300mm width x 1.6mm thickness)  EQ-bcnf-16m

Specifications

  • Material: Nickel Foam, (excellent anti-corrosive)
    Purity:                     > 99.9 wt % 
    Impurity:                 C≤200、S≤80、Fe≤100、Cu≤100、Si≤50  ( ppm)
  • Surface Density:     346 g/m^2
  • Length:                  1meter
  • Width:                    300mm
  • Thickness:             1.6 mm
  • Net weight:             104g
  • Porosity: ≥95%   (80-110 Pores per Inch. average hole diameters about  0.25mm)
  • Extensibility: Lengthwise≥5%; Widthwise≥12%
  • Tensile Strength:   Lengthwise ≥1.25N/mm^2;      Widthwise≥1.00N/mm^2
  • Sold in roll only

  • Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of nickel.
  • How to clean the Nickel Foam for Battery Cathode Substrate.  
  1. It can be removed the NiO by annealing in the hydrogen furnace.
  2. Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol was used for 5 min each to ensure the surface of the Ni foam was well cleaned. 


 
Porosity: ≥95%   (80-110 Pores per Inch, average hole diameter is about  0.25mm
 
Click the video above to see the battery cathode coated by MTI's Film coater MSK-AFA-II-VC


Other Metallic Foams

Related Product


Battery Powders

Heatable Ultrasonic Cleaner

Electrode Coating 

Coin Cell Assembling

 

Pouch Cell Assembling

Cylinder Cell Assembling

Electrolyte injection

New innovation in MTI

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

Hydrogen Tech Expo June 26-27 Houston TX Booth 567

Solid-State Battery Summit August 13-15 Chicago IL Booth 36

2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

AABC US December 9-12 Las Vegas NV

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.