|
|
Home Page
8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100
|
|
Please email for lead time
Item Number: OTF-1200X-VIII-100
Transported by LTL Freight (Truck)
|
OTF-1200X-VIII-80 is an Eight-zone 3" ID split tube furnace with a separated touch screen temperature control unit and max working temperature of 1100oC. This eight-zone furnace can create a step thermal gradient or long constant temperature zone up to 60" within +/- 0.5ºC by adjusting the seven zone temperature. The furnace is installed with 100 OD x 92 ID x 2700 mm L ( mm) quartz tube and Ait-tight flange, and also can accept various processing tubes from 1" to 4".
SPECIFICATIONS:
|
Furnace Structure
|
|
|
Power & Voltage
|
- AC 208-240V Single Phase, 50/60 Hz
- 9 KW Max. (50A breaker required)
- Powder cord is included without plug
- Note: If use 208V, three-phase power panel, need min. 30A breaker
|
|
Continuous Temperature
|
- 1100 °C under flowing gas
- 1000 °C under vacuum < 1 torr
- 1000 °C under vacuum < 1 torr
|
|
Max. Heating Rate
|
<= 10 °C /min
|
|
Quartz tube &
Thermal Block Placement
|
- Quartz Tube: 100 OD x 92 ID x2700 L mm
- Two fibrous alumina thermal blocks are included, which must be placed on two ends of the inside tube ( click pic below right )
  |
Vacuum Flange
|
- One pair stainless steel vacuum flange is included with a quick assembling flange (an outside clamp for quick installation) without cooling.
- Custom fitting is as request from customer ( 1/4NPT only , without valve )
|
|
Heating Zone
|
-
Eight independent heating zones:
Left and right heating zone length: 200 mm each and the rest heating zone length 150 mm each
-
Total zone length: 60" ( 1500 mm ) ( Including spacers between heating zone)
- Max. Constant temperature zone 60" ( 1500 mm ) if 8 zones heated at the same temperature ( within +/- 5°C)
|
|
|
- One touch screen digital temperature controller built-in a separated unit, which can control seven heating zones independently
- Each channel is PID automatically controlled and saves 10 programs and each program has max. 30 segments
- Built-in overheating & broken thermocouple protection.
- +/- 1 ºC temperature accuracy.
- Eight K-type thermocouples (one for each zone).
- RS485 Communications Port built-in. and software included,
- The furnace may be operated by PC ( please order PC separately ).
  
|
|
Net Weight
|
- Furnace with Supporting Table: 450Kg
- Controller: 92 kg
|
|
Shipping Weight & Dimension
|
- Furnace with Supporting Table: TBD
- Controller: 300 lbs; 48"x 40'' x 63"
|
|
Warranty
|
One-year limited warranty for electrical parts. (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
|
Compliance
|
- CE Certified
- The furnace is ready to pass NRTLor CSA certification at extra cost.
|
|
Shipping Weight & Size
|
TBD
|
|
|
- The tube furnaces with quartz/mullite tubes are designed for use under vacuum and low pressure < 0.2 bar
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
|
|
Temperature Control Instructions
|
   |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|