Compact High Temperature Creeping Tester with Small Punch (1350°C Max.) - OTF-1500X-S-CR

• AC 208-240V Single Phase, 50/60 Hz
• 1 KW 
• 15A air breaker is required
• 10 ft power cable is included, but no power plug

• Compact and splittable furnace with alumina insulation located inside the vacuum chamber.
• Max. working temperature  1350°C  ( 1300°C for continuously running ）
• Temperature accuracy: +/- 0.5 °C  (Eurotherm controller is available at extra cost for further accuracy, +/-0.1°C)
• A displacement sensor is built-in with +/- 1-micron accuracy
• The vacuum chamber is hermetic and sealed by silicone o-rings for atmosphere control. 

• Two-piece recrystallized SiC fixture (die). Assembling via threads.
• Sample size: 7.90 mm dia. x up to 0.5 mm thickness.
• Click here to order extra SiC Die
• Optional:  you may use  CNC Sample Puncher to make the round sample. ( click Pic.4 to order )
•                           Pic. 4

• Punch rod is made of Molybdenum through precision machining (Pic. 1)
• An alignment connector is installed with the pushing rod to ensure a 2.5 mm dia. head in the center of the SiC die.  (Pic. 2)
• 10 pcs of dead weight apply the force to an airtight pushing rod with a total 50Kg.  
• Click here to order extra Mo Punch Rod
•  Pic. 1    Pic. 2

  Heating &
Vacuum Chamber 

• Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
• Over-temperature protection and alarm allow for operation without attendant(s).
• +/- 1 ºC temperature accuracy.
• RS485 Communications Port.

• A laptop computer will be used as a control panel with software. One computer will control 4 sets of the machine.
• Software is included, but the Laptop computer is optional at the extra cost.
• The PC will display and record the curve of displacement vs Time at a fixed temperature and load (click Pic. below )
• 

Warranty 

• One-year limited warranty
• (Consumable parts such as heating elements, die, and pushing rod are not covered by the warranty)

Compliance

• CE Certified
• NRTL certification (UL61010)  or CSA certification is available upon request at extra cost.

Operation Instructions