1500ºC Thermogravimetric Tube Furnace ( 60 mm OD) - OTF-1500X-TGA

• Sample size 1 - 100g. 
• Digital balance with an accuracy of 1 mg
• Maximum crucible size Ø40×40H mm
• In-situ temperature measurement, up to 1500±0.1°C
  
• Air-tight configuration, measurements under a controlled atmosphere or vacuum. 
• 1/4" gas inlet and gas outlet and a KF25 vacuum port
• Labview remote control, communication, and data logging.

• 208-240VAC, 1 ph, 50/60Hz, 30A
• 4500W

• < 1500°C @ ambient pressure
• < 1400°C @ vacuum

• SiC heating elements
• Heating zone: 150 mm
• Temperature uniformity zone: 50 mm @ ±2°C
• Heating rate ≤ 20℃/min
• Recommended heating rate ≤ 10℃/min

• 99.5% alumina tube, Ø60×Ø51×500L mm
• One pair of SS 304 flanges for alumina tube
• Two 1/4" compression tube gas inlets for inert and reactive gases. 
• One 1/4" compression tube gas outlet for exhaust. 
• KF25 port for vacuum generation. 
• ISO63K port for a turbo pump (optional)
• One gas relief valve, preset at 3 psig

• Eurotherm 3000 series 
• 28 Segments of programmable temperature control
• +/- 0.1 ºC temperature accuracy
• Cascade temperature control
• S-type thermocouple
• Cold junction temperature compensation for thermocouples. 

Pressure Gauge

• One Inficon Pirani and diaphragm gauge with a power supply, up to 3.8E-5 Torr - PGC-554-LD

• A precision digital balance at the bottom of the chamber. 
• Accuracy: 1 mg resolution
• Sample amount: 1-100 g

• Alumina crucible, Ø40×40 mm alumina crucible

• PC remote control for linear actuator
• Temperature control and data logging
• Balance control and data logging

• Digital Temperature Controlled Recirculating Water Chiller
• 16L / min Flow, 2.8K BTU/hr
• 120V or 208-240VAC, 500W.

• Precision mass flow controller, 0 - 2 L. 
• Float flow meter, 0 - 1L
• Gas mixing system

• The TGA  can reach vacuum up to 10-2 torr by a mechanical pump and 10-5 by a turbo pump
•  
•  

 Warranty 

• One-year limited warranty
• Consumable parts such as heating elements, processing tubes, and o-rings are not covered

 Compliance

• CE, NRTL, or CSA certification is available upon request at extra cost.

Dimension

• L×W×H, 600×600×1900 mm

Reference Video