Hybrid Crystal Grower For Both CZ & Bridgman up to 1700ºC w/ Atmosphere Control - OTF-1700X-PVT

• Heating zone length: 200mm
• Constant temperature zone: 70mm within +/-1ºC
• 50 mm dia alumina tube with vacuum-sealed rotation and pulling mechanism.
• MoSi2 heating elements with Max. 1700°C working temperature
• Eurotherm temperature controller with +/- 0.1 ºC accuracy.
• Voltage: 208-240 VAC, single phase, 50/60Hz
• Power: up to 4 kW 

• High purity alumina Tube size:  50mm OD x 40 mm ID x 1000 mm L
• Top flange: water-cooled flange with a needle valve and a KF25 port for rotation and pulling mechanism.
• Bottom flange: flange with a needle valve and KF25 port for connection to a vacuum pump.
  
• Two 1/4" tube fitting for gas circulation or flow. 
• Working gases:    Inert gas, CO2, and oxygen gas up to 0.2 MPa.

• Travel is driven by precision servo motor
• Pulling Speed: 0.1 - 10 mm/hr.
• Pulling Rod Rotation Speed: 0.1 - 23 RPM
• Travel distance: 0 - 300 mm
• Faster travel: 35 mm/min

• Source raw materials will be put in the bottom flange with an included alumina rod.
• Crucible is not included, please click here to choose one
• The seed crystal ( substrate ) will be fixed in the pulling rod on the top flange.
• The seed crystal  will keep a constant distance from the crucible, and slowly move up with crystal growth during heating
• Inert gas or CO2 gas will be filled in the processing tune during crystal growth up to 2 bar pressure.

• The source material will be put in a crucible with V type bottom with a crystal seed.
• The crucible will be hung upon the pulling rod on the top flange 
• The crucible will rotate and move up during heating to grow a single crystal

• Two Eurotherm temperature controllers with two K-type thermocouples are builtin with +/- 0.1ºC accuracy.
• 28 segments programmable with PID adjustable for two heating zone independently.
• RS485 port and software (iTools) is ready for PC remote control
•  Note: It is the customer's responsibility to create a suitable thermal gradient for crystal growth.

Water Chiller
(Optional)

• A water chiller is required to prevent top flange overheating but it is not included in the standard package. 

• 

• Weight:    105 kg
• Size:     L×W×H: 860 mm×740 mm×2160 mm

• NRTL certification is available upon request

• One-year limited warranty and lifetime technical support