|
|
Home Page
12" Width x 8"Dia.Pressure Controlled Electric Rolling Machine (Calender) for Battery Electrodes - MSK-E2300A
|
|
In stock
Item Number: MSK-E2300A
Transported by LTL Freight (Truck)
Personalization
|
MSK--E2300A is a precision electric calendar machine (rolling press) with a high-quality hydraulic pressure controllable system. It can prepare electrode sheets (current collector with the material coated on it) at consistent and repeatable rolling conditions.
SPECIFICATIONS:
|
Working Voltage
|
|
|
Max. Power Consumption
|
|
|
Rollers (One pair)
|
- Dimensions: 200mm (Dia.) x 330mm (W)
- Material: HRC 60 - 62
- Effective Rolling Width: <250mm
- Ra: 0.8 ~ 1.25um
 
|
Press Gap
|
- 0.05 - 1mm adjustable by two-micrometer knobs
- Tolerance: 0.003mm
|
| Motor & Rolling Speed |
- 550W AC motor with frequency speed controller
- Speed range: 1.0 - 3.0 Meter / Minute adjustable by Touch Screen Control Panel
|
| Roller Surface Hardness |
- 60 - 62 HRC
- Never roll materials with HRC >50
|
|
Press Planeness
|
|
|
Pressure Control
|
- Pressure load: 1 - 25T adjustable by touchscreen control
- Digital pressure display shows set and real pressure force applied on the material
 
|
|
Compressed Air
|
>60 PSI required (Air compressor is not included, you may order one in the related product)
Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
 pic1  pic2
|
| Optional |
 |
|
Product Dimensions
|
 1180mm (L) x 610 (W) x 930 (H) |
|
Compliance
|
CE certified
NRTL or CSA certification is available upon request at an extra cost |
|
Warranty
|
- One-year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
|
Operation Video
|
    |
|
Application Notes
|
- To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
- Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
- Never roll materials with hardness > HRC 50
- In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing to sheet original thickness
- Clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion
- This rolling machine cannot be used under Ar gas
- It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor)
|
|
Net Weight
|
800kg |
|
Shipping Weight & Dimension
|
1930 lbs; 55" x 40" x 47" |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|