|
|
Home Page
Hi-Speed Spin Coater (10K rpm & 5" max) w/ Optional Heating or UV Cover up to 200°C- VTC-100PA
|
Click to enlarge
|
Transported by LTL Freight (Truck)
Product Options
| By Version:: |
|
| Voltage: |
|
|
VTC-100PA is a tabletop spin coater up to 5" diameter at Max. 10000 rpm. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control. The substrate can be held by vacuum (for thinner objects). The device has a user-friendly keyboard and LCD display for programming various parameters up to 12 programs, 6 segments. Spin duration, spin speed, and acceleration can be programmed from the front panel. All components in the device are corrosion protected to make it cleanroom compatible. This spin coaster can be used inside the glovebox with Ar gas.
SPECIFICATIONS:
Main Features
|
- 500 ~ 10000 RPM spinning speed programmable
- Accept substrate from 5 mm to 5"
- PP chamber for anti-corrosive operation.
- One gas inlet port on top of the cover can fill inert gas during coating
- One 20ml Plastic Syringe is included
- Suitable using Ar gas (vacuum pump must be outside glovebox)
- The safety interlock is integrated into the lid
|
Vacuum Chuck
|
- Chamber size: 150 mm diameter
- 2 sets of polypropylene vacuum chucks with different sizes (O-ring ID Φ44mm, Φ10.2mm), which can hold substrate from 10 mm to 5" Dia. ( see pic below )
- Click the picture below right to watch the demo video for how to use a vacuum chuck to hold a 10mm square sample.
- PTFE vacuum chuck is also available upon request.
  
|
| Vacuum Pump |
- One 120L/min Oilless Vacuum Pump is included
- Ø8 mm plastic vacuum tube is included
- To use inside an Ar glovebox, feed-throughs are required to connect the spin coater, the vacuum pump, and the controller. The feedthrough is optional upon request.
|
Programmable Control
 |
- The digital control panel can store 12 programs and each program has 6 segments programmable for speeds, acceleration, and spin duration (please click the picture left to see typical program settings)
- Speed: 500 rpm - 10000 rpm programmable
- Duration up to 60 seconds for each segment
- Acceleration: 100 - 2000 rpm / sec adjustable
- Accuracy: < 5%
|
| Input Power |
- AC 220V (Please email us for AC 110V Version)
- 1000 W total for the oilless pump and spin cater
- 24VDC high-speed motor
|
Gas Inlet |
6mm diameter gas inlet port allows customers to fill desired gas into the chamber, which can make coating under variable gas flow environment.
|
Liquid Injection
|
   |
| Optional |
- Option 1: PE heating cover with a digital single-point PID temperature controller up to 120°C(<10 minutes) is available upon request at extra cost. The drying process solidifies the as-coated film in less than a few minutes.
Click the demo video & picture below for more details. (Pic.1&2)
- Option 2: PTFE heating cover + 10mm dia. PTFE vacuum chuck set is capable of high temperatures up to 200°C (<10mins). A 30-segment programmable PID temperature controller is used for this option. (44mm dia. vacuum chuck is not included.)
- Option 3: UV LED lights and a controller for curing and polymerization are available on the options bar. ( 365 nm wavelength ) (Pic.3)
-
 Pic.1  Pic.2  Pic.3
|
Product Dimensions |
-
 450mm Depth ×280mm W ×340mm H
|
| Net Weight |
|
Operation Manual & Video
|
  (video for heatable cover)
|
| Application Notes |
 
|
Warranty &
Compliance |
- One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
- CE Certified
- NRTL or CSA certification is available at an extra cost.
|
| Warnings |
- Do not overflush the water bowl/base with any kind of liquid. Excess liquid will leak into the motor shaft and cause damage. Please use a fabric cloth to wipe out the residues that remain in the bow/base.
- Please turn on the water outlet when flushing the water bowl/base to avoid liquid overflowing during the operation.
- For more details about the cleaning procedure, please review the cleaning instructions for the spin coaters.
|
| Shipping Dimensions |
40"(L) x 30"(W) x 30"(H) |
| Shipping Weight |
46 kg (100 lbs) |
|
Sale Price: Starting at USD$3,998.00
|
|
|
|
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|