Browse Categories

Digital Controlled Infusion Syringe Pump with Heatable Glass Syringe -(0 - 25ml/min upto 100oC) - EQ-300SP-H-LD

Product Options



Digital Controlled Infusion Syringe Pump



  • Easy to use keypad interface
  • Holds small or big syringes up to 60 mL
  • Pumps continuously until you stop the pump
  • Infusion rate can be changed while pumping
  • Remembers previous settings on power up
  • Power failure mode allows pump to continue pumping after a reset
  • Syringe purge mode
  • Displays total volume dispensed in mL or µL units
  • Maximum pumping rate of  25 mL/hr with a 60 mL syringe
  • Precise reproducible flow rates
  • Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min
  • Infuses Only   Does not withdraw, volume target, or have computer interface
  • Infusion Syringe Pump with optional Heatable Glass Syringe is available at extra cost
                        Input Power Requirement 100 -240VAC, 0.75Amps
                        100°C 20ml Heatable Glass Syringe with Temperature Control Unit

                        Max. Power 

                        23 W 
                        Max. Temperature 
                        Thermo Couple  K type
                        Temperature Control Unit
                        • The controller uses PID via SCR power control
                        • 30 segments programmable for heating rate, dwell temperature and time, and cooling rate
                        • Receives analog output from infrared pyrometer
                        • Over temperature protection and alarm allows for operation without attendant(s).
                        • +/- 1 ºC temperature accuracy.
                        Dimensions 260 x 230 x 120 mm (L x D x H)
                        20ml Glass syringe
                        OD: 24mm

                        ID: 20mm
                        Total Length with booster: 145mm
                        Operation instructions
                        Application Notes
                        • Pre-metered Horizontal-Dipping Process
                        • Such syringe pump can precisely control the volume of the solution per unit coating area been fed into the gap between the cylindrical barrier and the glass substrate.
                        • Doctor-Blade (or Wire-Bar) Coating:  Such Syringe Pump can be used for adding a solvent at various concentrations. By using multiple syringe pumps, you can add an ingredient in a certain weight ratio to a mixed solution. Similar to the Horizontal-dipping Process, the blended organic solution is introduced into the space between the barrier and the substrate by such pumps' capillary action. The Doctor-Blade is transported horizontally at a given constant velocity, a thin solution layer is then spread and formed evenly on the substrate.
                        • Dip Coating:   Wet solution coating such as dip coating has been the most popular method for solution-processed devices.
                        • DIY an Ultrasonic Spray and Electrospinning device

                        Related Products

                        Shopping Cart
                        Your cart is empty.
                        Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
                        Mailing Lists
                        MTI sponsorships:
                        MTI Sponsors Thermoelectrics Workshop

                        MTI-UCSD Battery Fabrication Lab

                        MTI Sponsors the Postdoctoral Awards

                        Upcoming Shows:
                        APS March Meeting 2019 March 4-8 Boston MA Booth 312

                        TMS 2019 March 10-14 San Antonio TX Booth 101

                        36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL Booth 121

                        Recent Attended Shows:
                        2018 MRS Fall Meeting Nov 26-29 Boston MA

                        MS&T 2018 Oct 14-18 Columbus OH

                        Furnaces North America Oct 8-10 Indianapolis IN

                        Click here to see our past conferences


                        1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
                        2. We may add extra charges for paper order and net30 terms due to extra labor cost.
                        3. The prices listed are subject to change without notice.