Browse Categories
Search

Fast Heating & Cooling Vacuum Sealed Furnace (1100°C 2" I.D.) - VBF-1100X-Q


Please email for lead time
Item Number: VBF-1100X-Q
Transported by LTL Freight (Truck)
  VBF-1100X-Q is a 2" ID vacuum tube furnace with the function of fast heating and cooling ( optional water quenching ) for heat treatment of air-sensitive materials.   The sample will be placed inside half opened and vacuum-sealed tube,  then insert into the pre-heated furnace to achieve fast heating (~ 10oC/S ).  After treatment, the tube will be raised up automatically, then insert into an ice tank for quenching ( quickly cooling ).  This furnace was designed for LPS powder and can be used for quenching all material under vacuum or controlled atmosphere

SPECIFICATIONS

Power

  • Voltage: Single-phase 110 - 120 VAC / 50/60Hz, (20 A breaker installed)
  • 1500 W max. 
  • Note: Power cable included but without the plug. Please install a plug on your own or click the link below the picture to choose a plug according to your country or your lab requirements


Working Temperature

  • <= 1100°C continuously
  • Max. 1200°C, < 30 minutes
  • Temperature Uniformity: +/- 2°C

Heating Chamber
 

  • The heating module is made of  Ni-Cr-Al resistance wire with a fibrous alumina insulating layer.
  • Quartz tube has a dimension of 50mm O.D. x 44 I.D. x 263 H, mm)
  • SS304 vacuum flange with KF25 Vac. port with valve and gas inlet &outlet valves 
  • Quartz thermal block is included
  • Mechanical vacuum gauge is built-in
  • Vacuum level: 10-6 torr by turbopump and 10-3 by rotary pump  and 10-5 torr by a turbopump

Net Weight

100 kg

Shipping Weight

250 lbs

Shipping Volume

45"(L) x 28"(W) x 35"(H) 


Warranty

  • One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).  
  • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.

Compliance
  

  • CE Certified
  • NRTL or CSA certification is available upon request at extra cost.

    Warning  


    Click here to learn the installation of a gas regulator

    • Tube furnaces with quartz tubes are designed for use under vacuum and at low-pressure < 0.2 bars 
    • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.
    • A maximum temperature of 1000°C should be imposed on all quartz tube furnaces to avoid the quartz tubes undergoing deformations under vacuum.
    • The flow rate for gasses should be limited to < 200 SCCM for reducing thermal shocks

    Optional

    The furnace can upgrade to 4 quartz tubes with rotating mechanism to achieve high throughput sintering
          

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsorships:
    MTI Sponsors Thermoelectrics Workshop

    MTI-UCSD Battery Fabrication Lab

    MTI Sponsors the Postdoctoral Awards


    Upcoming Shows:

    APS March Meeting 2023 March 5-10 Las Vegas NV Booth 534

    TMS 2023 March 19 - 23 San Diego CA Booth 609

    40th International Battery Seminar Exhibit March 20-23 2023 Orlando FL Booth 121

    Recent Attended Shows:
    AABC USA 2022 December 5 - 8 San Diego CA

    2022 MRS Fall Meeting Nov 28 - Dec 2 Boston MA

    Click here to see our past conferences

     
    Notices
    1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
    2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
    3. The prices listed are subject to change without notice.