Browse Categories

Compact Stainless Steel Vacuum Glovebox with Automatic Pressure Controller - VGB-1-KJT

Please call for the delivery time
Item Number: VGB1KJT
Transported by LTL Freight (Truck)


* denotes required field

Vacuum pump and fitting assembly (click to review details)
VGB-1-KJT is a small size stainless steel glove box with an Antechamber, Gauges, and vacuum Flanges, which allows the glovebox to be vacuumed to remove moisture and oxygen without expensive inert gas purging. A pressure controller is integrated to automatically maintain the glovebox pressure at the set range. It is an ideal tool for material and chemical researchers to process air sensitive materials and solutions.

  • Glovebox: N/A
  • Pressure Controller: 110 - 220 VAC, 50/60 Hz
Glove Box Chamber

  • Case Material: Made of 11 gauge (3mm thickness) 304 stainless steel sheet with the support frame, which provides the heavy-duty structure for vacuum.
  • Dimensions: 555 (L) × 444 (W) × 414 (H)
  • Window: 480 (L) × 125 mm (H)
  • Max. Positive Pressure: 810 Torr (1.1 atm)
    • Note: Gloves cannot work if pressure is higher than 810 Torr
  • Max. Vacuum Level: 1.59E-2 Torr
    • ~50 Torr after 5 min pumping
    • ~6E-2 Torr after 4 hr pumping.
    • Note: Stainless Steel case may deform at a higher vacuum level
    • Leakage Rate in GloveBox: < 6 Torr/hour 
Pressure Controller
  • EQ-KJT-2V Automatic Pressure Controller is integrated with the glovebox to maintain constant inert gas pressure inside the main chamber. 
  • One pressure transducer and two solenoid valves are pre-installed in the back of the Main Chamber.
  • Pressure Range:  90 - 320 kPa  with 0.5% accuracy.
  • Pressure Controller must be power OFF when vacuum the Main Chamber.
  • Dimensions: 200mm(ID) x 220mm(L)
Vacuum gauge and valves
  • Two vacuum flanges are included for the glove box to achieve vacuum to remove moisture and oxygen without expensive inert gas purging.
    • Do not operate under vacuum. Vacuum is used for purging the chamber before the operation.
  • One KF-25 connector is installed on the back for connecting the humidity monitor or other testing equipment.
Power Extension
  • One outlet strip (Max power 1500W) with feedthrough is installed in the glove box main chamber.
  • Note: 110V power cord was included for immediate use. (For 208~240V power supply, no plug will be included) 

  • One pair of Latex Gloves are included for immediate use.
  • Optional: You may order 6'' Butadyl® gloves here because they have:
    • Increased stretching, bending ability, and tear strength
    • High effectiveness when vaporized hydrogen peroxide (VHP) is present
    • High resistance to aromatics, hydrocarbons, solvents, fats, and acids
    • High static dissipative qualities   
Vacuum Pump
  • The vacuum pump and fittings are not included. (Please order separately under Personalization) 
  • Note: A KF25 Vacuum Right-Angle Valve is necessary for connecting to a vacuum pump, please order it accordingly.
Product Dimensions 1186mm(L) x 480mm(W) x 490mm(H)
  • One year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance is not covered by warranty
  • Gloves are consumable items and are not covered under warranty
Operation Video   
Application Notes
  • Corrosive liquid (such as LiPF6 electrolyte) must be remain sealed in a container inside the glove box. Otherwise, liquid-vapor may condense and corrode the steel chamber and purification pipeline.
  • By closing the vacuum flange, the glove box can be vacuumed by a mechanical pump up to 0.5 torrs before filling inert gas. The moisture can be reduced below 50 ppm by vacuuming the glove box
  • After refilling the glove box with high purity Argon gas (5N purity), the glove box moisture can be kept below 180 ppm and oxygen below 200 ppm. In this way, you can save 1-2 tank of inert gas from purging at each operation
  • Please call or email us to get the price and lead time for multi-pins feedthrough on the glove box if you need to measure the sample inside the chamber.
  • 16 pins electrical feed through outside the glove box
    (4 pins per one feed through)
    16 pins electrical feed through inside the glove box
    (4 pins per one feed through)
Shipping Size 48"×40"×32"
Shipping Weight 320 lbs

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:

APS March Meeting 2023 March 5-10 Las Vegas NV Booth 534

TMS 2023 March 19 - 23 San Diego CA Booth 609

40th International Battery Seminar Exhibit March 20-23 2023 Orlando FL Booth 121

Recent Attended Shows:
AABC USA 2022 December 5 - 8 San Diego CA

2022 MRS Fall Meeting Nov 28 - Dec 2 Boston MA

Click here to see our past conferences

1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.