5.5 KW Wire Pressing Machine For Metallic Wire from 10mm to 1 mm - YLJ-1220-W

MSK-1220-W is a heavy-duty electric rolling press with 5.5 KW, which is designed for rolling metallic wire from ≤ 10 mm rod or bulk (< RC 50) to 1 mm diameter, such as Aluminium alloy, Copper, Nickel alloy and stainless steel, etc. This device is one of necessary for wire preparation of metallic wire for AM ( Click here to see details)

SPECIFICATIONS:

Power	208- 240V Three Phase, 50/60Hz  5.5 KW AC motor (7.5 horsepower) 380VAC, three-phase is available upon request AC Motor
Rollers	The rollers surface consists of a series of grooves with a diameter of 10 mm to 1 mm, which will press a large rod into a thin wire via one by one pressing The automatic winding roller is build Roller materials:            Hardening DC53 Roller size:                   120 mm dia  x 200 mm width (~4.7" Dia x 8" width) Hardness:                     HRC 60-62 Rolling thickness:          1 - 11 mm adjustable
Rolling Speed	0 - 6 mm / second adjustable by 22 segments
Overall Dimensions	520mm L x 620mm W x 1470mm H
Net Weight	480 kg
Compliance	CE Certified NRTL certification is available upon request at an extra cost
Warranty	One year limited with lifetime support Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Video & Instructions
Application Note	Never roll materials with hardness > 50HRC The thickness for each time pressing is dependent on material thickness.  Harder material shall be less press thickness, which customer shall test by themselves for the best parameters For some material, you may need to anneal it by furnace after each rolling to avoid work hardening