|
|
Home Page
40T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE
|
|
In stock
Item Number: YLJ40TA-PE
Transported by LTL Freight (Truck)
|
YLJ-40TA-PE is an electric lab press up to 40 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwells time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers to can use the press inside the glovebox.
Specifications:
Programmable
Electric Hydraulic Pump
|
- 208-240VAC, 50/60Hz (110V version is available via 1000W transformer)
- 180 W AC motor
- Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. ( not for drop pressure )
- One pump speed controller is built in to adjust pump speed
- One KF40 feed-through installed on the pipe, which allows the pipe is inserted into a glovebox and connect to press machine
- RS485 port is built-in on the control panel for PC operation.
- PC software based on Labview is available upon request at the extra cost. ( You must inform us in advance if you need PC operation, and suggest you buy a laptop from us for pre-test )
  
|
| Max. Pressure |
- 40 Metric Ton for pressing machine
- 45 MPa for the electric pump
- The transparent protection cover is built in the front of the pressing machine
|
| Hydraulic Oil |
|
| Hydraulic Hose |
|
| Optional KF-40 feedthrough |
- 3 meters long hydraulic hose with a KF40 feedthrough flange is optional which allows the machine to work inside the glove box.
|
| Bottom Hydraulic Cylinder Travel Distance |
|
| Top Support Screw Adjustable Height |
|
| Hydraulic Cylinder Diameter |
|
| Max. Working Space |
|
| Gauge Pressure Value to Force Conversion |
|
Pressure Display on the gauge (MPa)
|
5.6
|
11.4
|
17.0
|
22.8
|
28.4
|
34
|
39.8
|
45.4
|
|
Force on Hydraulic Cylinder (T)
|
5
|
10
|
15
|
20
|
25
|
30
|
35
|
40
|
P = T x g x 10/ (πr^2)
- P: pressure (Mpa) applied to your working piece
- T: force (metric ton) applied to the pressure vessel cylinder
- g: standard gravity. g ≈ 9.8 m/s2
- π: ~3.14
- r: radius (cm) of the pressure vessel (1.5 cm)
- *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
|
| Pressure Accuracy |
- ±0.5MPa in high pumping speed ±0.1 MPa in low pumping speed
|
| Operation Temperature |
|
Overall Dimension
|
 |
| Pressing Die (Optional) |
Pressing dies with various diameters are available upon request at an extra cost
 |
| Net Weight |
|
| Shipping Weight & Dimension |
|
| Compliance |
|
| Warranty |
- The pressing machine was quality inspected in the USA, lifetime support is provided
- One year limited standard warranty (Extended warranty is available up to 5 years at an extra cost)
|
| Operation Video and Instructions |
 
|
| Application Notes |
- The pressing die cannot be used for pressing powder with a particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns powder to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of each experiment
- Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
- The press can be put in a glovebox
  
- Warning: Customers must always wear protective goggles during operation !!!
|
Packing List:
|
Name |
Qty |
| 1 |
Main machine (40T hydraulic pressing machine) with electronic hydraulic pump |
1 unit |
| 2 |
Allen Hex Wrench |
1 set |
| 4 |
Manual CD |
1 pc |
|
Sale Price: Starting at USD$3,998.00
|
Sale Price: Starting at USD$4,998.00
|
|
|
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI-VISTEC Cylindrical Cell Pilot Line
MTI Sponsors the Postdoctoral Awards
Announcement:
MTI KJ Group Files Lawsuit Against Shangdong Gelon LIB Group for Copyright Infringement of MTI products and Manufacture & sale of counterfeit goods
MTI and Celgard have successfully reached a settlement under court for the litigation on patent and trademark
Upcoming Shows:
|
|