Browse Categories

500 MPa Max. Manual Cold Isostatic Press (CIP) with 30 mm ID Vessel - YLJ-CIP-500M

In stock
Item Number: YLJCIP500M30
Transported by LTL Freight (Truck)
YLJ-CIP-500M is a manual cold isostatic pressing (CIP) device operated via a manual hydraulic pump up to 500 Mpa. One set of the CIP vessel and press 30 mm vessel with 40T press is included. It is an excellent tool for material research to prepare high-density compounds and ceramics, compared to dry die pressing.

Hydraulic Cylinder Pressure
  • 0 - 40T for 30 mm ID vessel  (38T for continuous use)
Bottom Cylinder (Piston) Traveling Distance
  • 30 mm Maximum
CIP Vessel Size

  • Selectable  chamber size at
  • Inside: 30 mm (I.D.) x 110 mm (H)         Overall:  Φ100 × 315 H (mm)   
Vessel Pressure

  • 0 - 500 MPa
  • For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
  • P = T x g x 10 / (π x r^2 )
    • P: Actual pressure (Mpa) on the working piece
    • T: Actual force (metric ton) applied on the pressure vessel cylinder
    • g: gravitational acceleration of earth g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the Pressure Vessel (1.5 or 2.5 cm)
Hydraulic Press
  • Manual operation hydraulic press with pressure gauge and valve
  • Max. force:  40 metric ton
  • Optional:  You may upgrade the manual pump to an automtic electric pump at the extra cost ( Click Pic below to see specs )
Overall Dimension
40T Press: 220 (L) × 160 (W) × 590 (H) mm 
Net Weight
  • 60 Kg (press)
Shipping Weight & Dimensions
  • 315 lbs
  • 48"x40"x38"
  • CE Certified
  • One year limited warranty
Operation Video 
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation.  ( Pic. 1)
  • Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
  • In order to get a high density of the sample,  you shall press pre-pressing a pellet, then CIP ( Pic. 3)
  •             Pic. 1        Pic. 2       Pic. 3
    • The Max. pressure the mold can handle is 85T, please do NOT exceed it
    • Never let the press holding the target pressure for more than 1 hour
    • It's normal that the target pressure decreases a little bit during the pressure holding time
    • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
    • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance (30mm)

    Related Products

    Shopping Cart
    Your cart is empty.
    Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
    Mailing Lists
    MTI sponsorships:
    MTI Sponsors Thermoelectrics Workshop

    MTI-UCSD Battery Fabrication Lab

    MTI Sponsors the Postdoctoral Awards

    Upcoming Shows:

    Hydrogen Tech Expo June 26-27 Houston TX Booth 567

    Solid-State Battery Summit August 13-15 Chicago IL Booth 36

    2024 MRS Fall Meeting December 1-6 Boston MA Booth 901

    AABC US December 9-12 Las Vegas NV

    Click here to see our past conferences

    1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
    2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
    3. The prices listed are subject to change without notice.