Browse Categories
Search

200C Max. 6T Hydraulic Lamination Hot Press (12x12 cm area) with Temp. Controller - YLJ-HP60-LD


Transported by LTL Freight (Truck)

Product Options

Voltage:

YLJ-HP60-LD (updated from YLJ-HP-6T-LD) is 200°C Max. compact lamination hot press consists of 6 metric ton hydraulic press with two heated platens (120x120mm area). The temperatures of the heated platens are controlled by a digital temperature controller up to 200°C. The hot press is designed for preparing electrode & electrolyte of solid and flexible lithium battery.

SPECIFICATIONS:

Feature

  • Two heating platens are controlled by a digital temperature controller up to 200°C

Heated Platen
  • Platen Area: 120mm x 120mm  
  • Made of Aluminium alloy with the inserted heating element
  • Warning: Please don't press a small area die directly against the soft Aluminium alloy surface. You may add a hard steel plate on top and bottom  if press a small diameter die

Max. Working Temperature

  • 200°C Max. (<30 minutes)
  • 100°C continuous
Temperature Control
  • The single set point digital controller is installed in the control cabinet
  • Temperature accuracy ±1°C

Max. Working Pressure

  • 6 Metric Ton (Note: the machine base must be secured to an unmovable & solid table before operation)

Max. Opening 

  • ~2 inches between two heating plates

Gauge Pressure Value to Force Conversion

Gauge Displayed Pressure Value (Mpa)

12.5 

25

37.5

43

Actual Force Applied on the Hydraulic Cylinder (Ton)

1.75

3.5

5.25

6

  • Notes: 
    • The actual force applied to the Hydraulic Cylinder (Ton) is equal to the force applied to your working piece
    • For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
  • P = T/(πr^2) x g x 10
    • P: Pressure (MPa) applied to your working piece
    • T: Force (Ton) applied to the Hydraulic Cylinder 
    • g: Standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the working piece
    • *1 Metric Ton = 1000 kg; 1 MPa ≈ 10 kg/cm2 

Power Requirement

  • 110VAC or 220VAC +/-10%, 50/60Hz, single-phase (please select the voltage in the selection bar)
  • 1200 W max,15A circuit breaker is required 

Option

  • Upgrade to Digital Pressure Gauge (100Kp to 30Mp) with $600 extra (Pic.1 & 2)
  • We may install a digital load cell between the hot plate and hydraulic cylinder ( click Pic. 3 & 4 to order)
           Pic. 1   Pic. 2     Pic. 3 Pic. 4

Compliance

  • CE Certified 
  • UL / CSA Certification is available upon request at extra cost 

Machine Dimensions

   

Shipping Dimensions

  • 40" x 26" x 30" (L x W x H)

Shipping  Weight

  • 120 lbs

Operation Instructions

     

Warranty

  • One-year limited standard warranty (Extended warranty is available for up to 5 years at an extra cost)
  • Please note that small pores (<1.5 mm dia) may appear at the surface of the platens due to the process of die-casting aluminum, which is not covered by the warranty.  

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

APS March Meeting 2023 March 5-10 Las Vegas NV Booth 534

TMS 2023 March 19 - 23 San Diego CA Booth 609

40th International Battery Seminar Exhibit March 20-23 2023 Orlando FL Booth 121

Recent Attended Shows:
AABC USA 2022 December 5 - 8 San Diego CA

2022 MRS Fall Meeting Nov 28 - Dec 2 Boston MA

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.