Browse Categories
Search

Compact Vacuum Sealer with Integrated Control Unit for Preparing Pouch Battery - MSK-115A-S


Transported by LTL Freight (Truck)

Product Options

Voltage:
MSK-115A-S is a compact vacuum sealer for sealing the aluminum-laminated case for pouch cell in a glove box, which integrates temperature, pressure, and duration control into one unit for easy handling without feedthrough of the glovebox. The machine is compatible with both Argon and N2 gas.

SPECIFICATIONS:
Input Power

  • Single phase 110 VAC or 208-240 VAC (selectable at Product Options), 50 / 60 Hz
  • 600 W power
Vacuum Level
  • Vacuum range:  -95 ~ 0 kPa adjustable
  • The vacuum pump is not included. Please click the picture to the left to order at MTI.
  • If you have your own pump with KF25 PORT, Barbed fitting to KF-25 Adapter is included for immediate use.
Sealing Die
  • Max battery size: ≤ 160 mm in length and width, ≤ 12 mm in thickness
  • Sealing width: 5 mm (customizable)
  • Sealing length: ≤ 190 mm
  • Sealing evenness: ≤ 0.03 mm overlapping precision of top and bottom sealing dies
  • Sealing die type: hard type (without rubber, only for Al case sealing. Not suitable for sealing case with tabs in between)
Sealing Pressure 

  • Pressue range: 0 ~ 7 kg/cm² adjustable. Vacuum chamber lid and sealing die need to be driven by compressed high purity inert gasses with recommended 60 psi pressure.
  • Consumption: ~ 0.1 L compressed air per sealing
  • Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box.
  • Please note the air compressor is not included and not recommended to use in the glove box.
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
               pic1                pic2
Sealing Temperature
  • Two independent digital temperature controllers are built in.
  • Temperature range: 50 ~ 300 ℃ adjustable with control accuracy of +/- 2 
  • Recommended temperature: 200 ℃ for top sealing die, and  160 ℃ for bottom sealing die
Sealing Time
  • 0 ~ 99 seconds adjustable (3 ~ 4 seconds recommended)
Size
    
  • Dimension for 220V version: 408 mm L x 365 mm W x 480 mm H
  • Dimension for 110V version: 340 mm L x 380 mm W x 580 mm H
  • The compact 115A is suitable for working under glove box environment while with plenty space for other materials and equipment.
                        
Net Weight
  • 50 kg
Glove Box Compatibility
    
  • A KF40 Feedthrough with all necessary wire and tube is included to allow operating inside the glove box.
  • NO. 1  Vacuum Release
  • NO. 2  Gas Inlet Port (Tube size is 8), for all pneumatic component such as Die and  Lid cover, must use Inert gas when operating in the glove box.(Gas Inlet Pressure ~116 psi)
  • NO. 3  Gas Outlet Port
  • NO. 4  Vacuum Port for Connecting the vacuum pump ( ~11.5mm OD, Barbed fitting to KF-25 Adapter is included TO connect to pump).
  • Attention: High purity inert gasses are required for the operation of the machine.
Optional Supporting Rack
(For 220V version only)
  • A customized supporting rack for extra height is available upon request. Please contact us if you want to order the rack at extra cost.
  • Please click the picture on the bottom right to see the configuration of the sealer in a glove box.
  • Note: The supporting rack is for 220V version ONLY! The 110V version comes with extra height (Please check the row "Size" to compare), therefore the supporting rack is not needed. 
                  
Warranty
  • One Year limited warranty with lifetime support
Compliance
  • CE Certified
  • NRTL Certification is available upon request at extra cost
Operation Manual & Video

                       
Application Notes
  • Please wear gloves to operate the machine.
  • Beware of the automatic vacuum chamber lid. Only one operator is allowed for this equipment.
  • Please clean the sealing dies after each use. Clean the sealing die after it has cooled down to avoid corrosion by the electrolyte.
  • Check the level and smoothness of sealing die surface every week. If there is serious damage to the sealing die, please contact MTI to order a replacement.
  • Lubricate the cylinder every week
  • Check the screws in sealing dies and stage every month. Make sure they are tightened.
  • Compact design enables the operation inside the glove box with Ar atmosphere where Lithium SulfurLithium AirLithium Solid State or Li-ion half cell will be assembled. Please click the images below to understand these technologies and how it fits in a glove box.
        

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab


MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
APS March Meeting 2019 March 4-8 Boston MA Booth 312

TMS 2019 March 10-14 San Antonio TX Booth 101

36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL Booth 121

Recent Attended Shows:
2018 MRS Fall Meeting Nov 26-29 Boston MA

MS&T 2018 Oct 14-18 Columbus OH


Furnaces North America Oct 8-10 Indianapolis IN


Click here to see our past conferences

 

Notices
1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.