|
|
Home Page
Five Zones Split Vertical Tube Furnace with 4" Quartz Tube & SS Vacuum Flanges - OTF-1200X-VT-V-100
|
|
Please email for lead time
Item Number: OTF1200XVVT4
Transported by LTL Freight (Truck)
|
OTF-1200X-VT-V-100 is CE certified five zones split Vertical Tube Furnace with vacuum sealed 100mm (4") diameter quartz tube, which can achieve faster sample heating and quenching under vacuum or flowing gas. Precision temperature controller can provide 30 heating and cooling segments with +/- 1 oC accuracy. It is an idea furnace for making quenching test and nano-powder
SPECIFICATIONS
| Furnace Casing |
Double layer steel structure with air cooling to keep case temperature > 65oC |
|
Power
|
6KW
|
|
Voltage
|
AC 208-240V Single Phase, 50/60 Hz
|
|
Max. Temperature
|
1200oC < 1 hrs
|
|
Continuous Temperature
|
1100oC < continuous
|
|
Max. Heating Rate
|
<= 20oC /min
|
|
Tube Size and Materials
|
- OD:100mm ; ID:94mm ; Length: 1400mm
- (Quartz tube was included in the standard package)
- 1, 2" 3", 80mm and 5" tube optional at the same cost
|
|
Heating Zone length
|
- 200mm for each single zone
- 5 x 200mm = 1000 mm in total
|
| Equal temperature zone |
- 650mm (+/-1oC) if set 5 zone in same temperature
|
|
Temperature Controllers
|
- MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
- Over temperature protection and alarm allows for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Five K-type thermocouples (one for each zone).
- RS485 Communications Port.
 
|
|
Laptop, software & WiFi Control(Optional)
|
|
| Vacuum Seal |
 |
Fitting Ports
|
- Standard 1/4‘’ Barbed fittings with needle valves.
- For supplying high-pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order.
- Optional: In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click the underlined to order.
- Optional: You may also consider using the parts in below to increase the vacuum efficiency
   |
|
Vacuum Level
|
0.1torr (depends on the vacuum pump)
|
|
Heating Element
|
Fe-Cr-Al Alloy doped by Mo
|
|
Dimension
|
1100mm x 450mm x 670mm ( exclude mobile cart )
1200mm (H) x 600mm (W) x 600mm (W) install with mobile cart
|
|
Net Weight
|
about 180Kg (excluding mobile cart)
|
|
Shipping Package Size after Crating
|
65"x40"x80"
|
|
Shipping weight
|
675 lbs
|
|
Warranty
|
|
|
Compliance
|
- CE Certified
- All electric components ( >24V) are UL / MET / CSA certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. （ please click marks below to learn details )
     |
|
Application Notes
Click here to learn the installation of a gas regulator
|
-
-
- Warning: The tube furnaces with quartz tube are designed for using under vacuum and low pressure <0.2 bars / 3 psi / 0.02 MPa
- The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
|
|
Operation Instructions
|
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|