Browse Categories

1700ºC Max. Two Zone Rotary Tube Furnace with 60 mm OD Alumina Tube -- GSL-1600X-R60-II

Please email for lead time
Item Number: GSL-1600X-R60-II
Transported by LTL Freight (Truck)
GSL-1600X-R60-II is  high temperature
Furnace Construction

  • Double shell casing with three cooling fans.
  • High purity Alumina fibrous insulation for max. energy saving.
  • Dual heating zone with 1600ºC max. continuous working temperature
Heating Zone length
Max. Working Temperature
  • Two zones heated separately
    • Zone 1:   working temperature  800 - 1700ºC (heated by MoSi2 ),  
    • Zone 2:  working temperatur  800 - 1700
  • Cnstant temperature zone length: 10" (250mm) within +/-1
  • Max. Heating rate: 10
Processing tube & Sealing Flange
  • 99.8% purity Alumina Tube
  • 60 mmstainless steel vacuum sealing flange with valve and meter is included
  • One ceramic block is installed on each side flange to blcok thermal radiation during rotation
  • 2-3/8" (60mm) O.D. x 2-1/8" (54mm) I.D x 40" (1000 mm)  Length with inside block (see picture below )

Gas Fittings Inlet Fitting: Elbow Push-in connector for 6mm O.D tube; Outlet Fitting:  Elbow Push-in connector for 12mm O.D tube

Temperature Controller
  • Two 30 segments programmable PID digital temperature controller 
  • Note: To achieve fully temperature computerization please order a set of MTS-02 control module. If you order the control module with the furnace we will install and test it before we ship out the product. We recommend you order computer (laptop) from us. More information please click here
Temperature Uniformity
  • +/- 1°C in heating Zone
Tube rotating Speed
  • 0 - 7 RPM variable
Furnace tilt angle
  • This furnace can not be tilted 
Max. Vacuum level 
  • 4.5x10-2 torr (<0.1mtorr/s leaking rate if close all the valves to airtight the tube chamber)
Production yield
  • 2 kg per batch
  • 8 KW Max
  • 208 - 240V single phase (50 A Breaker required)
  • One year limited warranty with lifetime support 
Laptop, software & WiFi Control (Optional)
  • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
  • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters operating range.
  • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
  • Note: 
    The software is only compatible with MTI’s Yudian Temperature Controller


  • CE Certified
  • All electric components ( >24V) are UL / MET / CSA certified
  • The furnace is ready to pass TUV(UL61010)  or CSA certification at extra cost. 
                       ( please click marks below to learn details )
Product net weight
Product dimension
   1300 x 600 x 1200mm
Shipping dimension:     49" x 40" x 70" 
Shipping weight     500 lbs


Click here to learn more about the installation of a gas regulator.
  • The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.02 MPa / 0.2 Bar/ 3 PSI 
  • Attention: A two stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
  • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
  • limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely used up to 1500°C
Operation Instructions
Demo video


Application Notes

  • The concept of continuous power feeding and processing can be realized by the use of Magnetic Fluid Sealed Swivel Coupling in line with Volumetric Feeder and Rotary Furnace. Please view the assembling approach diagram and video in below.  
  • For CVD coating, you may choose our multi channel Gas delivery system as Pic below right.
  • For CVD coating, you may choose our multi-channel Gas delivery system as Pic below right.
  • Ref Article: Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
APS March Meeting 2019 March 4-8 Boston MA Booth 312

TMS 2019 March 10-14 San Antonio TX Booth 101

36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL Booth 121

Recent Attended Shows:
2018 MRS Fall Meeting Nov 26-29 Boston MA

MS&T 2018 Oct 14-18 Columbus OH

Furnaces North America Oct 8-10 Indianapolis IN

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.