Browse Categories

Four Sources Thermal Evaporating System with Precision Temperature Controller - GSL-1700X-EV4

Please call for the delivery time
Transported by LTL Freight (Truck)

Product Options

Vacuum Pump:


GSL-1700X-EV4 is a compact thermal evaporating system with a total of 4 evaporating sources and precision and programmable temperature control. Four evaporating crucibles could be used to deposit multiple different materials to grow multilayers films one by one in the same chamber atmosphere. The system is suitable for coating most of metallic and organic materials film up to 2" size from 200 ºC to 1500 ºC (or 200 ºC - 1700 ºC with an optional B-type thermocouple).  Co-evaporation fro 2- 4sources is available upon request.

Structure & Features

  • 280 mm O.D. x 260 mm I.D. x 310 mm Height quartz chamber for easy cleaning and sample loading
  • 2" Dia rotatable evaporating sources for the uniform film coating
  • Tungsten coil heater and alumina crucible for high-temperature coating up to 1700 ºC
  • Precision temperature control with 30 programmable segments and +/- 1 ºC accuracy
  • A high vacuum can be achieved up to 1.0E-5 Torr via optional turbopump
  • Gas flow port and valve are built-in for chamber purge and CVD possibility
Input Power
  • Input voltage:  AC 208 - 240 V 50/60 Hz, single-phase  ( 110V AC is available via 1500W transformer )
  • Input Power: 1,200 W
  • output power:: 12 V, and 30 A max current. Recommended working current <30 A
  • Power cable included without plug
Temperature Control & Heaters

Optional for Co-evaporating
Heating 2- 4 crucibles at the same time  for co-evaporating  is available upon request
  • Four Alumina Evaporating Crucibles with 3 mL each capacity. Four sources cannot be used at the same time. The multilayer's deposit would be done one by one.
  • Tungsten coil heater with a thermocouple is built in at the bottom of alumina crucible (for temperature control (PIC. 1). Please refer to the left picture for dimensions
    • Standard S type thermocouple (included and installed) - heating from 200 ºC1500 ºC (PIC. 2)
    • Optional B-type thermocouple (at extra cost) - heating from 1200 ºC - 1700 ºC
  • One digital temperature controller with 30 programmable segments and +/- 1 ºC accuracy (PIC. 3)
    • Recommend to limit the temperature heating / cooling rate to 0.3 ºC/s (or 20 ºC/min) below 1200 ºC, and limit to 0.15 ºC/s (or 10 ºC/min) from 1200 - 1700 ºC
    • For continuous heating above 1300 ºC, please limit the operation time to less than 1 hour to preserve the service life of bottom flange O-ring
    • For fast coating up to 2000 °C, the user can remove thermocouple, alumina thermal block, and alumina crucible, load evaporation material directly into the tungsten coil heater, and use current manual control mode (PIC. 4)
  • Four alumina crucibles (up to 1700 ºC) and two tungsten coil heaters are included. Please refer to the Optional section for ordering spare parts
                       PIC 1                          
PIC 2                                  PIC 3                                          PIC 4                                   PIC 5               
Rotatable Sample Holder
  • One 100 mm Dia. rotatable sample stage and its shutter are installed on the top flange.
  • Rotating speed: 5 rpm
  • The distance from sample holder to evaporation source is adjustable from 40 mm to 85 mm
  • Please click here to learn how to adjust the position of the sample stage.
Film Thickness Analysis System                       

  • The KF25 vacuum port is installed to connect to a vacuum pump
  • The vacuum may reach <1E-5 Torr by pumping overnight with optional Turbo-pump
  • A vacuum pump is required for coating. Please choose from the following Product Options
Gas Inlet
  • 1/4 tube fitting is built-in for chamber purge or forming gas processing
  • One needle valve is built-in to control gas flowing rate
Overall dimension

Quartz Chamber Dimension

O.D.:280mm  ( 11")
I.D.: 260mm  (  10.2")
Length: 310mm  ( 12.2")
Please click here to order the Quartz Chamber replacement.
  • One year limited warranty with lifetime support
Net Weight
  • 80 kg 
Shipping Weight & Dimensions
  • 200 lbs, 40" x 30" x 32"
Operation Instruction

Application Notes

  • To achieve the high vacuum required for the evaporation of some materials, user can
    • Check the chamber, O-ring, and flange for any particle, fiber, or scratch. Use lint-free tissue wetted with isopropyl alcohol (IPA) to wipe clean the surface
    • Use heater tape to bake the chamber at 150 ºC and pre-heat the coil heater and crucible at 500 ºC while pumping with the optional turbopump for at least 2 hours
    • Pump the chamber overnight without heating if a vacuum higher than 1.0E-5 Torr is needed
  • DO NOT start the heating program or manually ramp up the current without an enclosed chamber and a vacuum!
  • DO NOT release the vacuum or stop pumping when the coater is in evaporation operation! During the heater cool down, stop pumping or release the vacuum ONLY when the temperature is decreased below 100 ºC!

Standard Package
Item No.
Pic Quantity
Quartz chamber 280 mm OD (ID = 260 mm, L = 310 mm)


Alumina outer crucible set (lid, thermal block, bottom crucible)

Alumina cone-shaped crucible (OD = 19.6 mm, L = 24.0 mm)
Anti-corrosive capacitance diaphragm gauge & controller with power supply, up to 3.8E-5 Torr
Tungsten coil heater, 1 mm wire diameter                                                                                                          
B type thermocouple (at extra cost) - heating from 200 ºC - 1700 ºC
Tee flange for secure vacuum connection

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI-VISTEC Cylindrical Cell  Pilot Line

MTI Sponsors the Postdoctoral Awards

MTI KJ Group Files Lawsuit Against Shangdong Gelon LIB Group for Copyright Infringement of MTI products and Manufacture & sale of counterfeit goods 

MTI and Celgard have successfully reached a settlement under court for the litigation on patent and trademark

Upcoming Shows:

IMAT Virtual Edition October 26 - 28

Recent Attended Shows:
TMS 2020 Feb 23 - 27 San Diego CA Booth 700

AABC Europe Jan 12 - 16 Wiesbaden Germany

Click here to see our past conferences


1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.