|
|
Home Page
Kanthal Super 1800C MoSi2 Heating Element -360mm L - for KSL-700X-KA2Furnace - EQ-KSKSL-1800-L-LD
|
|
In stock
Item Number: EQ-KSKSL-1800-L-LD
|
|
Specifications
|
 |
- Materials: MoSi2
- Max. surface temperature: 1800°C
- Working furnace temperature: 1750°C
- A (Distance between two shanks) : 30 mm (1.18")
- D1 (Terminal Diameter) : 12 mm (0.47")
- D2 (Heating Zone Diameter): 6 mm (0.23")
- L1 (Terminal Length): 200 mm (7.87")
- L2 (Heating Zone Length): 160 mm (6.30")
|
| Applications |
|
| Installation |
 |
When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber. The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
|
| Warning |
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them.
No warranty will be issued for damage caused by improper installation.
|
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI. |
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. |
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|