Browse Categories

Atomatic Winder for The Assembling of Multi Cylindrical Cell at 10 PPM Speed for 200 Cell/Batch - MSK-112A-SA

Please email for lead time
Item Number: MSK-112A-SA
Transported by LTL Freight (Truck)
MSK-112A-SA is a fully automatic winding machine for assembling muti-cylindrical cell cores (also known as “jelly roll”) at 10 PPM ( 10 pack per minute).  The batch of cathode and anode strips ( pre-welded tab),  roll of separator and roll of tape are pre-installed in the machine, then you can touch button to wind the core of cylindrical cell automatically at 10 PPM speed up to 200 cell per batch


  • Color touchscreen control
  • Pre-loading one batch electrodes, one roll of separator, and one roll of tape, then touch button to go
  • Automatic finish cut and tape upon the completion of the configured number of rotations
  • 10 pcs per minute speed for each batch up to 200 cells.
  • Optional for 18650, 21700 or 26650 cell
Input Power
  • Single phase 208 - 240 VAC, 50 / 60 Hz
  • 2 000 W power
Compressed Air

  • Compressed air of 0.7 MPa is needed for the operation of this machine
  • Please note the air compressor is not included. Please click the picture below to order one at MTI, or order it from your local hardware store
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
      pic1                pic2
Cathode / Anode Feeding
  • Pre-loading one batch of electrodes ( 100 trip max.), one roll of separator, and one roll of tape,
  • Vaccum holder will absorb the electrode strip in one by one to feed into assembling line
  • Width range: 25 – 70 mm (adjustable on feeder bed)
  • Thickness range: 100 – 300 μm
Separator Feeding
  • Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP)
  • Length range: separator roll with a diameter < 250 mm
  • Width range: 25 – 70 mm
  • Thickness range: < 100 μm
  • Tension range: 0 – 4 N for both top and bottom separator films

  • Winding needle size: 3.5 mm OD
  • Electrode winding size: 14 – 32 mm OD, 25 – 70 mm in length
  • To wind an electrode core with a certain OD, a spreadsheet for calculating needed number of turns and electrode sheet length can be downloaded here
  • Winding speed: 0 – 400 rpm adjustable
  • Winding precision: < 0.5 mm edge roughness
Tape  Loading
  • One roll of tape pre-load on the machine for strapping finished electrode core with the  tapes
  • Roll diameter:   150 mm Max.
  • When winding finished, the tape will be applied to the winded core and cut.
  • 1600 mm L x 1300 mm W x 600 mm H
Net Weight
  • 800 kg
  • One-year limited warranty on lifetime support
  • Rusting or damage due to improper storage conditions or maintenance is not covered by warranty
  • CE Certified
  • MET Certification is available upon request at extra cost
Operation Instruction & Video            

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
2018 MRS Fall Meeting and Exhibit Nov 25 - 30 Boston MA Booth 901

APS March Meeting 2019 March 4-8 Boston MA Booth 312

TMS 2019 March 10-14 San Antonio TX Booth 101

Recent Attended Shows:
MS&T 2018 Oct 14-18 Columbus OH

Furnaces North America Oct 8-10 Indianapolis IN

AiMES 2018 Sept 30 - Oct 4 Cancun Mexico

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.