Browse Categories

Compact Vacuum Electrolyte Injection System for Pouch and Cylinder Cells - MSK-113-CP

Transported by LTL Freight (Truck)

Product Options

Battery Types:
This is a compact vacuum liquid electrolyte injection system for pouch and cylinder cell batteries.
  • MSK-113-PVM: Vacuum electrolyte injection system for pouch cell only
  • MSK-113-CP: Vacuum electrolyte injection system for both pouch and cylinder cell.
The device can be used inside the Ar gas glovebox.
Advanced Features

  • Vacuum liquid electrolyte injection for both pouch and cylinder cell batteries with the programable setting via the touch screen controller.
  • Pouch cell vacuum sealing, electrolyte injection, vacuum standing three in one design
  • Cylinder cell vacuum electrolyte injection, vacuum standing, electrodes immerging under pressure
  • It could be used either in or outside of the glove box
  • Electrolyte injection speed adjustable
  • The electrolyte filler with a speed control console and injection pump for the high-precision dispensing is integrated into the system
  • Electrolyte injection could be done under different vacuum levels in order to achieve a better electrode immersion
  • Compact & desktop; One unit with PLC control
Input Power
  • AC 208 - 240 V 50/60 Hz Single phase
  • Power: 1.2 KW
Working Gas
     pic1                    pic2
  • 0.5~0.8 Mpa high purity compressive inert gas (Ar is preferred) is required for driving the pneumatic system in the glovebox
  • Continues dry inert gas purging for the working chamber is required to maintain a dry atmosphere for electrolyte injection and diffusion 
  • Air compressors and fitting are required if used in the dry room, but not included. please click here to order 
  • Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
Electrolyte Dispenser
  • Electrolyte plunger metering pump is included for precise electrolyte filling; Injection Accuracy: 3 %
  • During the electrolyte injection and vacuum standing under the vacuum, The liquid electrolytes would be vaporized. Please consider refilling the electrolyte if necessary
  • Electrolyte filling volume and injection rate adjustable via touch screen PLC control
Pouch & Cylinder Cell Size Adaptability
  • Pouch cells: Max. L 150 mm * W 125 mm * H 12 mm
  • Cylinder cells: 18650; Customizable: 21700 & 4680
Control Panel   Color touch screen panel to set programma for vacuum level,  inert gas filling, electrolyte injection amount,  sealing temperature, and time.
  • Vacuum Degassing:
    • Vacuum range:  -95 ~ 0 kPa adjustable
    • Dwell Time: 0~99 seconds adjustable
  • Inert gas filling:  
    • Max. pressure:  110 Kpa max. adjustable
    • Dwell Time: 0~99 seconds adjustable
  • Sealing Temperature and time:
    • Two digital temperature controllers on the front panel provide independent control for the left and right heating dies.
    • Temperature range: 50 ~ 250 ℃ adjustable (accuracy +/- 2 ℃)
    • Recommended sealing temperature: 180~190 
    • Sealing time:  0 ~ 99 seconds adjustable (5 ~ 6 seconds is recommended)
  • Electrolyte injection: 
    • 0.3 ml - 100 ml  programmable under normal atmosphere
    • Injecting under vacuum or inert gas selectable
Pouch Cell Sealing Die
  • Sealing width: 6 mm (Customizable)
  • Sealing length: ≤ 180 mm
Pouch Cell Sealing Pressure
  • Maximum sealing pressure: 70 kg*f
Cylinder Cell under pressure
  • Maximum applied pressure 120 KPa
Vacuum Pump (not included)

  • Double-stage rotary vacuum pumps are needed for vacuum diffusion and degassing and vacuum sealing. Please click the picture below to purchase separately.
       For Pouch cell only              For both    Pouch + Cylindrical cell
Net Weight
  • ~65 kg
  • One-year limited warranty with lifetime support
  • NRTL Certification is available upon request at an extra cost
  •  the patent 201822101349.0 for the Pouch Cell Sealing Machine integrated with Electrolyte Injection MSK-113 since December 2019
Operational manual & Video
Application Notes
  • Please clean the sealing dies after each use. Clean the sealing die after it has cooled down to avoid corrosion by the electrolyte.
  • The featured air-tight chamber enables the operation under the Ar atmosphere where Lithium-SulfurLithium AirLithium Solid-State, will be assembled. Please click the images below to understand these technologies and how it fits in a glove box.
  • Please add the high-precision digital balance to the chamber in order to monitor and evaluate the liquid electrolyte lost during the vacuum electrolyte injection. Because there might be some liquid electrolyte evaporation caused by the pressure difference between the liquid electrolyte tank and vacuum chamber.

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:

APS March Meeting 2023 March 5-10 Las Vegas NV Booth 534

TMS 2023 March 19 - 23 San Diego CA Booth 609

40th International Battery Seminar Exhibit March 20-23 2023 Orlando FL Booth 121

Recent Attended Shows:
AABC USA 2022 December 5 - 8 San Diego CA

2022 MRS Fall Meeting Nov 28 - Dec 2 Boston MA

Click here to see our past conferences

1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.