|
|
Home Page
Desk-Top Battery Pack Tab Spot Welder - MSK-330P
|
|
Please email for lead time
Item Number: MSK-330P
|
MSK-330P is a tab Spot Welder for making a larger battery pack manually. It is designed for the production of battery pack manufacturers (Alkaline, NiMH. NiCd, Li-Ion/LiMnNi. LifePO4, NMC) with more reliable and consistent welding.
It could be used for AA / AAA / C / D / F/ M / 10440 / 14430 / 14500 / 14650 / 17500 / 18650 / 26650 / 38120 / 40160 sizes of batteries.
SPECIFICATIONS:
| Features |
- Pneumatic System with foot panel for faster operation
- Microcomputer single-chip control, the welder may achieve single-pulse, double-pulse, or multi-pulse welding and can weld tab up to 0.5 mm
- Adjustable welding head ( up and down ) for easy operation
 
|
| Working Voltage |
- 208-240V AC, 50/60Hz (110V is available via a transformer)
|
| Output Power |
|
| Welding |
- Programmable Dual Welding Process
- Variable Height of Welding Head Adjustment
- Support nickel-plated tab thickness up to 0.5mm
- Independently adjust for the pressure of two welding probes, ensuring stable and reliable welding pressure
- Small heat affected weld zones
- Capable of extremely fine energy adjustment; Current: 0-99% Adjustable
|
| Welding probes |
- Allow independent adjustment for pressure
- Ensure consistent welding pressure
- Fully eliminates the phenomenon of low voltage or condensation occurred to lithium batteries after welding
- Homogeneous welding spot, small spark, and no black spots, and stable welding current
- Quick energy release for welding highly conductive metals such as copper
- Small heat affected weld zones
|
| Welding Switch |
- Built-in optoelectronic welding switch, which can eliminate the need of changing switches for similar welding machines
|
Controller
|
- Digital LED control panel for setting all parameters
- All parameters are set via microcomputer.
- Adopts LCD display and keypad adjustment, resulting in accuracy, visualization, and easy operation
- Pre-welding time: 0 - 99 ms
- Welding time: 0 - 999 ms
- Welding current: 1- 30A
|
| Tab Thickness Applicable |
- 0.2 - 0.5mm thickness tab
- (10 pcs 0.2mm Tab will be provided in the package for customer's practice)
|
| Pneumatic Control (Not included) |
- Air pressure at 0.2Mpa ~ 0.8Mpa is required for the operation (Air Compressor is not included. Please click here to order)
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
| Working Space |
- Max. The opening between the welding tip and bottom stage is 9cm (19cm by removing the bottom stage)
- Max. Depth is 8.5cm (measured from the center of the bottom stage till the backend of the machine)
|
| Safety Protection |
- Fuse to Protect Over Current
- Warning Lights for Switch device / Weld Head Transformer / Air Supply
|
| Compliance |
- CE certified
- NRTL / CSA certification is available upon request at the extra cost.
|
| Warranty |
- One year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance is not covered by warranty
|
| Net Weight |
|
| Product Dimensions |
- Working Table: 810 mm (L) x 610 mm (W) x 790 mm (H)
- Welding machine: 319 mm(L) x 210 mm(W) x 310 mm(H)
|
| Shipping Weight & Dimensions |
|
Operation Manual & Video
|
  |
| Application Notes |
- Welding current can be as high as 600A, voltage is 6V
- Please click here to learn the basic knowledge of Capacitive Discharge Spot Welder
- Avoid touching weld spots immediately after the weld has been performed as they will be hot
- Always wear safety glasses when working with spot welders and weld heads
- Be careful not to pinch fingers in moving weld head parts or between welding electrodes
- Remove hand jewelry before welding
- Tab Size Reference Setting:
- Purchase replacement electrode here.
| Tab Size |
Welding Time |
Welding Current |
| 0.254mm Tabs |
25ms Welding Time |
70% Welding Current |
| 0.180mm Tabs |
25ms Welding Time |
55% Welding Current |
| 0.110mm Tabs |
25ms Welding Time |
40% Welding Current |
*Setting may require slight adjustment between various tabs and batteries for best performance
|
|
|
| | |
|
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed. | |
| | |
|
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop
MTI-UCSD Battery Fabrication Lab
MTI Sponsors the Postdoctoral Awards
Upcoming Shows:
|
|