Browse Categories

Bench-Top NanoFiber Electrospinning & Electrospraying Unit with 3 Collectors & Heater & Humidity Monitor - MSK-NFES-3

Please email for lead time
Transported by LTL Freight (Truck)

Product Options

Control Model:


    MSK-NFES-3 is a bench-top electrospinning system. It features user-friendly and task-oriented design. The ease of operation and competitive pricing places our equipment ahead of other products available in the market. MSK-NFES-3 syringe pump renders a smooth and uninterrupted flow enabling uniform spinning. The high voltage power supply delivers 0-30 kV output voltage range with a maximum current capacity of 0.5 mA. A Y-stage target, a stationary plate target, and rotating mandrels of different diameters are included along with the unit.
    MSK-NFES-3 fume hood provides an enclosed atmosphere with transparent side walls to monitor the electrospinning process. A common electronic control unit is integrated into the fume hood. The fume hood also has features like the exhaust fan, granite work surface, halogen lighting, and optional features like exhaust duct dimension customization.
    Nanofiber Electrospinning unit is a system for producing the ultrafine fiber with the diameter of 20 - 1000 nm. The nanofiber has a high specific surface area, small diameter, and large porosity. There are more than 100 kinds of polymers could be used as raw materials, and also protein, collagen, organics (PEO, DNA, PAA, PLA, nylon, polyester, acryl resin, PVA, PS, PAN, peptide, cellulose).
Note: Updated with one 3-axis nozzle & Dual-channel syringe pump with independent speed control from July 1, 2016. Updated with integrated humidity monitor from February 1, 2017


  • Software control of various features like mandrel rotating speed, duration, syringe pump flow rate, X, Y stage speed, etc.
  • Rotating mandrel targets of varying diameters, Y-stage target, and stationary plate target are provided with the system.
  • Stand-alone fume hood has features like exhaust fan, halogen lighting, and transparent door for monitoring electrospinning process
  • Built-in arc protection circuit
Input Power
  • 208~240 VAC single phase (For 110 VAC, please order a 3000W transformer)
  • Max power consumption: 1500 W
High Voltage Power Supply

  • 0 - 30 kV single output, 0.5 mA max current
  • Digital voltmeter and current meter
  • Electrostatic removal device - discharge stick is integrated to the fume hood
  • Constant current / constant voltage modes available
  • Built-in arc protection circuit. Normally for the electrospinning process, current < 5 μA. Please limit current < 20 μA to avoid high voltage arcing damage
Dual-channel Syringe Pump
  • Dual-channel syringe pump with independent speed control allows syringes to eject solution at different rates. 
  • Four syringe dispensing systems are included and controlled by the software. (Two syringes per group at the same pump rate)
  • Compatible with standard 2.5 to 50 mL glass syringes
  • Pumping rate: 1 uL/min - 35 mL/min for the included 20 mL syringe
  • Syringe holder made of insulating material to work under high voltage conditions
  • Programmable X motion profile to control the film coating characteristics
  • Moving resolution 1mm.
  • In standard package, only the standard high voltage alligator clip support is included. The 3-axis support and T shape dual 3-axis nozzle support are not included. (See optinal.) 
  • Attention: Please use the glass syringes. Due to the safety concerns, do not use the disposal plastic syringes.
3 Axis Nozzle Package for Combined Solution Ejecting (Optional)
  • Combined with the dual-channel syringe pump, the 3-axis nozzle can mix two fiber-forming solutions together and eject the mixture.
  • Solutions are combined at the tip of the 3 axis nozzle head.
  • What is in the optional package:
    • 3-axis Nozzle
    • Syringe with Tube Mount
    • 3-axis Support
    • T-shape Dual 3-axis Nozzle Support


Mandrel Collector

Plate Collector

Y-Stage Collector
Three types of collectors are included as standard accessory 
  • Mandrel collectors for electrospinning
    • 7 sets with various size: 200 mm length x 100, 75, 25, 12, 6, 2 mm Dia.
    • Actuator: Microprocessor controlled BLDC motor with hall sensor feedback
    • Speed: 400 to 3500 rpm adjustable with stability: +/-1%
    • PC-based control of speed and duration
    • Rotating mandrels can be used as a target to get an aligned continuous mesh of nanofiber
  • Plate collector for nanofiber-collecting
    • 320 mm x 100 mm x 2 mm thick stainless steel plate with grounding
  • Y-stage collector for flat film coating
    • Stage dimensions 250 mm x 175 mm x 2 mm thick
    • Plate material: Stainless steel
    • Programmable Y motion profile to control the film coating characteristics
    • PC-based control of speed, movement profile, and duration
    • Moving Resolution 1mm
Lamp Heater

  • Halogen lamp heater with thermal couple and digital temperature controller are integrated into the fume hood for environmental heating up to 40 ºC
  • Max power: 1000 W 
Fume Hood

  • Stand-alone unit with built-in power supply and features like heater, lighting and exhaust fan
  • Transparent glass windows on front and both sides for easy monitoring of the electrospinning process
  • Footprint: 1000 mm x 880 mm x 1370 mm
  • Construction material: Stainless Steel, Aluminum, and Glass. Fume hood is epoxy coated for electrical insulation
  • Front door interlock for turning off high voltage output when the door is accidentally opened during the electrospinning process. Hazard lamp is installed on top of the fume hood to indicate that high voltage output is on. 
  • Exhaust fan with 3.8'' Dia. venting port is installed on the top of the hood which can be connected to an exhaust outlet at the customer's facility
  • The volumetric flow of Exhaust fan is 117 CFM (cubic foot/minute [ft3/min]), click the link Conversion Calculator to convert between cubic meters/hour and cubic foots/minute.
  • The system controller box is connected to laptop or Surface Pro via RS232 port and USB adapter
  • Centralized software control of syringe pump, X-stage, Y-stage, mandrel collector, and almost all of the electrospinning parameters 
  • All of the process parameters can be saved as a user process and retrieved later for analysis or re-run
  • One brand new laptop computer or one Microsoft Surface Pro with pre-installed software is included. (Please select at Product Options) 
Humidity Monitor and Control

  • Humidity monitor is integrated into the fume hood for monitoring the humidity level (RH%) ranging from 2% - 95% (Click left picture for more details)
  • **Optional compact Peltier dehumidifier (not included) can be integrated and controlled by the humidity monitor for continuous humidity control down to ~20 % RH for the fume hood
Ultrasonic Spray ( Optional )
  • You may add an ultrasonic head to upgrade the equipment as ultrasonic-electro-spray (Click picture below)
  • One-year limited warranty with lifetime support (demo before purchase available)
  • CE certified
  •    Total: 1000 mm L x 880 mm W x 1370 mm H
Operation Instructions                  How to Operate               Spray Pattern
Reference Article
  • Two pallets: 800 lbs with 48" x 47" x 63" dimension, and 250 lbs with 48" x 40" x 33" dimension
Application Notes
  • Be cautious of using harzardous materials. The working chamber of this unit is not flame-proof, explosive proof or vacuum sealed. Contact your health and safety department manager for detail material handling instruction and prevention/protection practises and recommandations. If you need a vacuum sealed safety chamber please consider the MSK-USP-06.

Related Products

Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards

Upcoming Shows:
APS March Meeting 2019 March 4-8 Boston MA Booth 312

TMS 2019 March 10-14 San Antonio TX Booth 101

36th International Annual Battery Seminar & Exhibit Mar 25-28 Fort Lauderdale FL Booth 121

Recent Attended Shows:
2018 MRS Fall Meeting Nov 26-29 Boston MA

MS&T 2018 Oct 14-18 Columbus OH

Furnaces North America Oct 8-10 Indianapolis IN

Click here to see our past conferences


1. Prices listed online are valid for US market and whom pay by credit card only. There will be extra charges for shipping & handling. Price various from country to country.
2. We may add extra charges for paper order and net30 terms due to extra labor cost.
3. The prices listed are subject to change without notice.