Dual Explosion-Proof Box for Constant Temp. Battery Test (20"x20"x20", 125L, RT- 46oC) - MSK-TE903-AC

Sale Price: RFQ

If you are international, please click this.

Please email for lead time

Item Number: MSKTE903AC

Transported by LTL Freight (Truck)

The MSK-TE903-AC Dual Explosion-Proof Steel Box with Temperature Controlled Atmosphere provides a safe enclosure for over-charging & forced discharging of all kinds of battery cell testings based on the UN38.3 standard (38.3.4.7 & 38.3.4.8) with a controlled temperature range of 23 °C - 46 °C. The two separate compartments with a total of 4 feedthrough ports allow for the testings of multiple batteries at the same time. One feedthrough required for air conditioning unit to regulate temperature.
SPECIFICATIONS

Power	100 - 240VAC ( 50/60Hz), 100W
Structure & Material	Materials: Chamber: 1.5 mm thick brushed SS304 with tensile strength > 500 Mpa Exterior: 3 mm thickness cold rolled steel with tensile strength > 400 Mpa Structure: Two anti-explosion chambers, top and bottom Chamber Size: 500mm x 500mm x 500mm (x2) Testing Cables: One pair of clamps with 3 meter long cables installed inside on each chamber to connect batteries rated at 30A max. Ports: Each chamber has two 2" diameter holes reserved for electric cables of battery testing equipment Safety door: The pressure relief door is built on the back of each chamber. In the event of a battery explosion, the door will open and release pressure. Note: The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single-cell or 160Wh for battery pack without protection circus
Venting Fan	Venting port with high-quality exhaust fan is installed in the back chamber which shall be connected to your venting system. (ducting and exhaust system are not included ) Warning: Must keep venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of a battery explosion. Venting fan: 24 VDC, 3425 RPM, 235 CFM, 54.3 dBA Centrifugal in-line exhaust fan with aluminum flex duct connection is recommended but not included. If you need control chamber temperature between 23oC - 46oC, we may help you to install a spot air conditioner ad the picture below, at the extra cost
Lighting	Anti-explosion LED light (30W) is installed inside of each chamber. The angle of illumination is adjustable up to 90°
Electrode Holder & Cables	Two sets of battery electrode clamps with 10 AWG gauge cables (30A Max.) are included for easy & quick connections to batteries
Mobility	Four mobile wheels are installed at the bottom for easy transportation
Net Weight & Dimensions	220 kg L700mm x W630mm x H1800mm
Shipping Weight & Dimensions	620 lbs 48"x40"x88"
Battery Testers (Optional)	A smart battery analyzer for use as the source of over-charging and forced discharging is available through here:
Warranty	One year limited manufacturer's warranty with lifetime support; extended warranty available upon request at additional cost.
Demo Video
Application Notes	IEC 62133 Safety Test Standard Details Please click here to review the UN38.3 Li-Ion Battery Transportation Safety Testing Requirements Other equipment for testing of IEC 62133 or UN38.3 Standards can be found at http://www.mtixtl.com/batterytestequipent.aspx

Dual Explosion-Proof Box for Constant Temp. Battery Test (20"x20"x20", 125L, RT- 46oC) - MSK-TE903-AC

Related Products

Portable Digital Temperature Calibrator with PC Software - NIST certificated - EQ-TC-calibrator-LD

8 Channel Battery Analyzer (10A 30V Max) with Laptop & Software - BST8-10A30V