Manual Torque Wrench for CF Flange/Jig Installation - EQ-CFTQ

• The torque wrench makes sure the equal forces are applied to the bolts when installing the CF flange(M14 Screws) on MTI high-pressure furnace or 24mm screw nuts on the mechanical Jig.
• • M14 Hex Bit Socket of Torque wrench for high-pressure furnaces.
  • 
• Hex Deep Socket for mechanical Jigs
• 

Specifications:

• Drive: 1/2 in.
• Ratchet: Cr-V, 24 tooth
• Length: 14-1/2 in.
• Dual Range: 10-150 ft./lb.
• Increment: 1 ft./lb. / 1.36 N/m
• Accuracy: +/- 4%

Demo Video                 Tighten the screws by hand in the following order  :