Browse Categories
Search

Hydrogen Gas Type Regulator, Two Stage Brass 0-100 psi Analytical Cylinder Regulator - CGA-350-LD


Sale Price: Safety Enhance product, For Sell with Hydrogen Furnace Only
If you are international, please click this.
In Stock (for Sale within the Continental US Only)
Item Number: CGA350
Important Note
For any application involving processing gas in the furnace, to ensure the safe use of furnace flange, please always install the two stage gas regulator to the cylinder. Read the furnace instruction to understand the pressure rating of each part in the system. Determine and limit the input gas pressure before the operation to avoid overpressure which could cause damages to pressure gauge, needle valve or other fittings. Failure to install gas regulator could cause severe personal injury. 
E.g. The max pressure for MTI mechanical gauge (pic below) in the flange is 0.15Mpa (22psi). It may cause pressure gauge broken when higher pressure is applied. Use the gas regulator to limit the input pressure to avoid overpressure.

Installation
1. Connect the gas regulator to gas Cylinder.  Install a 1/4" tube fitting to the outlet of the gas regulator. 2. Install another 1/4 tube fittings in the flange.
Use a 1/4 stainless steel or PTFE tube (low pressure) to connect the gas regulator and flange. 
NOTE: Make sure the thread type of the 1/4 tube fittings before installation. For most gas regulator in U.S., the 1/4 tube fitting is required to have 1/4 MNPT thread type.   For MTI flange system, the 1/4 tube fitting is required to have 1/4 MBSPP thread type
3. Finish Installation.
Please notice that the connector of the Hydrogen Gas Type Regulator is female POL connector. While the inert gas type Regulator is the male connector. 

Specifications of CGA-350 gas regulator
Maximum Rated Inlet Pressure  3,500 PSIG
Outlet Pressure Ranges  0-25, 0-50, 0-100, 0-250 PSIG
Flow Capacity - Cv 0.058
Ambient Operating Temperature -40°F to +165°F
Designed Leak Rate Bubble-Tight (helium)
Weight 4.4 lbs
Ports (4) 1/4" FNPT
Inlet  1/4" FNPT
Outlet  1/4" MNPT
Decay Inlet Characteristic  0.26/100 psi
Cylinder CGA 580
Material Brass
Inlet Gauge 0-4000
Flow Capacity (SCFH) 900
Max Inlet Pressure (PSIG) 3500
Gas Argon,Helium,Nitrogen
Max Outlet Pressure (PSIG) 100
Manual
Option  Flashback Arrestor
to Cylinder Regulator.

Option Hydrogen detector

Related Products

Inline Flashback arrestor for MTI Hydrogen Gas Furnaces, MTI-Flashback
Sale Price: Replacement Part for Existing Customers
Shopping Cart
Your cart is empty.
Please clear the browsing history before ordering the product. Otherwise, availability and price are not guaranteed.
Mailing Lists
MTI sponsorships:
MTI Sponsors Thermoelectrics Workshop

MTI-UCSD Battery Fabrication Lab

MTI Sponsors the Postdoctoral Awards


Upcoming Shows:

APS March Meeting 2023 March 5-10 Las Vegas NV Booth 534

TMS 2023 March 19 - 23 San Diego CA Booth 609

40th International Battery Seminar Exhibit March 20-23 2023 Orlando FL Booth 121

Recent Attended Shows:
AABC USA 2022 December 5 - 8 San Diego CA

2022 MRS Fall Meeting Nov 28 - Dec 2 Boston MA

Click here to see our past conferences

 
Notices
1. Prices listed online are valid for the US market and who pay by credit card only. There will be extra charges for shipping & handling. Prices vary from country to country.
2. We may add extra charges for paper orders and NET 30 terms due to extra labor costs.
3. The prices listed are subject to change without notice.